Fujitsu A6220 A6220 User's Guide - Page 82
Opening the Memory Compartment, Installing a Memory Module, Memory Upgrade Module, MEMORY
View all Fujitsu A6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6 Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with those in the slot. Alignment keys Figure 34. Opening the Memory Compartment Figure 35. Installing a Memory Module 7 Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place. 8 Replace the cover and reinstall the screws. THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK. ONCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY. 82 - Memory Upgrade Module