Fujitsu FI 4220C Operator Manual - Page 54
Connecting the SCSI Interface Cable
View all Fujitsu FI 4220C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
I Connecting the SCSI Interface Cable When using the scanner with SCSI interface, a third-party SCSI interface cable and SCSI card must be present. • SCSI interface cable The physical specifications of connector is complied with SCSI-2.The 50 Pin Contact Shielded High-Density SCSI Device Connector is used. • SCSI card The recommended SCSI card is noted on the following home page. 2 http://imagescanner.fujitsu.com/ ATTENTION • When connecting the SCSI interface cable, be sure to first connect the SCSI interface cable then turn on the power of the scanner and the personal computer. • Connect the scanner so that it is the terminal device on the SCSI daisy chain. • The SCSI card and SCSI interface cable has to be purchased separately. INSTALLATION OF A SCANNER 2.2 Connecting the Scanner to a PC 25