Fujitsu FI 4220C Operator Manual - Page 56
Press down the scanner power button on the, Function No. display to turn on the scanner.
View all Fujitsu FI 4220C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
HINT The factory default setting for SCSI ID is "ID 5". If the SCSI ID of another SCSI device is set to the same ID, either change the scanner's SCSI ID or change the SCSI ID of the other SCSI device. For details on how to change the SCSI ID, see "I Setting the SCSI ID" in this section. 3. Press down the scanner power button on the Function No. display to turn on the scanner. 2 4. Press the power button on the face plate of the PC to turn on the PC. ATTENTION This scanner is provided with two interfaces: SCSI-2 and USB1.1. On this scanner, each of the SCSI and USB interfaces is controlled exclusively, so both interfaces cannot be used simultaneously. Scanner can be only connected to either USB or SCSI interface. INSTALLATION OF A SCANNER 2.2 Connecting the Scanner to a PC 27