Fujitsu FI 5015C Operator's Guide

Fujitsu FI 5015C - FB CLR USB 2.0 PERP50PG ADF Manual

Get Fujitsu FI 5015C - FB CLR USB 2.0 PERP50PG ADF PDF manuals and user guides
UPC - 097564307713
View all Fujitsu FI 5015C manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu FI 5015C manual content summary:

  • Fujitsu FI 5015C | Operator's Guide - Page 1
    P3PC-1592-01ENZ0 fi-5015C Image Scanner Operator's Guide
  • Fujitsu FI 5015C | Operator's Guide - Page 2
  • Fujitsu FI 5015C | Operator's Guide - Page 3
    the Scanner 8 2.2 Loading Documents on ADF 12 2.3 Loading Document on Flatbed 16 2.4 Scanning Documents 18 2.5 How to use the Scanner Driver 20 Chapter 3 MAINTENANCE 35 3.1 How to clear the paper jam 36 3.2 Cleaning 37 3.3 Replacing Consumable 42 fi-5015C Image Scanner Operator's Guide i
  • Fujitsu FI 5015C | Operator's Guide - Page 4
    Chapter 4 TROUBLESHOOTING 51 4.1 Error Indications in the Function Number Display........ 52 4.2 Troubleshooting 54 APPENDIX A SCANNER SPECIFICATIONS AP-1 APPENDIX B Using [Scan] or [Send to] button AP-3 APPENDIX C GLOSSARY OF TERMS AP-5 INDEX ...IN-1 ii
  • Fujitsu FI 5015C | Operator's Guide - Page 5
    INTRODUCTION Thank you for purchasing the fi-5015C Color Scanner. This document describes how to handle fi-5015C and basic operation methods. Before you start using fi5015C be sure to thoroughly read this manual to ensure correct use. ■Regulatory Information FCC declaration This equipment has
  • Fujitsu FI 5015C | Operator's Guide - Page 6
    Bescheimigung des Herstellers / Importeurs Für den fi-5015C wid folgendes bescheinigt: •In Übereinsstimmung mit den Bestimmungen der office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are uniform among
  • Fujitsu FI 5015C | Operator's Guide - Page 7
    errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors nuclear power facilities scanner lamps. •Do not incinerate, crush, or shred the lamps or scanner parts. Trademarks Microsoft, Windows, and Windows fi-5015C Image Scanner Operator's Guide v
  • Fujitsu FI 5015C | Operator's Guide - Page 8
    system, the general term "Windows " is used. Adobe Acrobat Adobe® Acrobat® All the descriptions in this manual assume the usage of not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this
  • Fujitsu FI 5015C | Operator's Guide - Page 9
    scanner application you are using. The screenshots in this manual were captured from FUJITSU TWAIN32 scanner driver, ScandAll 21 Image Capturing Utility Software, FUJITSU ISIS scanner driver, QuickScan Pro™ image capturing software and Adobe® Acrobat®. fi-5015C Image Scanner Operator's Guide vii
  • Fujitsu FI 5015C | Operator's Guide - Page 10
    plug. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock. Do not install the device in locations that has oil smoke, steam, humidity, and dust. Do not install the scanner in locations subject to oil smoke
  • Fujitsu FI 5015C | Operator's Guide - Page 11
    problems such as smoke, strange smells or noises, disconnect immediately the power plug in order to turn out the scanner. Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. fi-5015C Image
  • Fujitsu FI 5015C | Operator's Guide - Page 12
    and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the
  • Fujitsu FI 5015C | Operator's Guide - Page 13
    cause scanner trouble or even fire. Install the scanner in a well-ventilated location. Before moving the scanner, make sure the shipping lock is locked. When moving the scanner, be sure to lock the shipping lock in order to prevent damages to the scanner. fi-5015C Image Scanner Operator's Guide xi
  • Fujitsu FI 5015C | Operator's Guide - Page 14
    xii
  • Fujitsu FI 5015C | Operator's Guide - Page 15
    Chapter 1 1 NAME OF PARTS This chapter shows the exterior view and the name of each part to descrive its function. 1.1 Units ...2 1.2 Operator Panel ...5 fi-5015C Image Scanner Operator's Guide 1
  • Fujitsu FI 5015C | Operator's Guide - Page 16
    Front side 1 2 3 4 5 6 7 8 Part 1. Automatic document feeder (ADF) 2. Side guides 3. ADF paper chute 4. Extension 5. Document cover 6. Document stopper 7. Flatbed 8. Operator panel Function Automatically feeds documents one by one to the reading position in the scanner. Holds the documents
  • Fujitsu FI 5015C | Operator's Guide - Page 17
    on Flatbed. On which the document is set face down. 1 23 4 Part 1. USB connector 2. ADF cable connector 3. DC inlet 4. Main Power switch Function Connects USB cable to PC. Connects the cable from ADF. Connects the cable from AC adaptor Turns the power ON or OFF to the scanner fi-5015C Image
  • Fujitsu FI 5015C | Operator's Guide - Page 18
    4. Side (ADF side) Part 1. Shipping lock 1 Function Locks the scanning head to prevent the scanner damaged when moving or transporting. 8QORFNHG /RFNHG 4
  • Fujitsu FI 5015C | Operator's Guide - Page 19
    Indications in the Function Number Display" on page 52 Launches an application software which is linked by the value of Function number display. Launches an application software linked. Lights when the scanner is turned on. Turns the scanner ON or OFF fi-5015C Image Scanner Operator's Guide 5
  • Fujitsu FI 5015C | Operator's Guide - Page 20
    6
  • Fujitsu FI 5015C | Operator's Guide - Page 21
    Windows XP. Also, when FUJITSU TWAIN32 is updated the screens and operations noted in this chapter will differ slightly. 2.1 Turning ON/OFF the Scanner 8 2.2 Loading Documents on ADF 12 2.3 Loading Document on Flatbed 16 2.4 Scanning Documents 18 2.5 How to use the Scanner Driver 20 fi-5015C
  • Fujitsu FI 5015C | Operator's Guide - Page 22
    on/off by connecting or disconnecting the power cable.The procedure is as follows. 1. Open Scanner's Properties. 1) When turning on the power, check that the scanner is connected to your PC. Refer to "2.3 Connecting the Scanner your a PC" in fi-5015C Getting Started on the CD-ROM for information
  • Fujitsu FI 5015C | Operator's Guide - Page 23
    ] window, double click the [Scanners and Cameras] icon. ⇒The [Scanners and Cameras] window is displayed. 4) Right click the "fi-5015C", and select [Properties] from the menu (for Windows Me, Win- dows XP), or double click (for Windows 98, Windows 2000). fi-5015C Image Scanner Operator's Guide 9
  • Fujitsu FI 5015C | Operator's Guide - Page 24
    ⇒The [fi-5015C Properties] dialog box appears. 5) Click the "Device Set" tab. ⇒The following panel appears. 2. Click [Power Control] button ⇒The following screen is displayed. 10
  • Fujitsu FI 5015C | Operator's Guide - Page 25
    : • Load the document on the ADF paper chute. • Press any button on the operator panel. (The scanner will be turned OFF when pressing down the power button for at least two seconds.) • Execute a command from the scanner driver. BASIC SCANNER OPERATIONS fi-5015C Image Scanner Operator's Guide 11
  • Fujitsu FI 5015C | Operator's Guide - Page 26
    of paper that is not recommended for feeding with ADF, a paper jam may occur in the scanner or a wrinkle may occur on a sheet. To prevent this from occurring, use Flatbed when scanning such paper. ■ Document Size For ADF: Minimum 115 (Width) x 140 (Length) mm (4.53 x 5.51 in.) Maximum 216 (Width
  • Fujitsu FI 5015C | Operator's Guide - Page 27
    sheets must be HINT evenly aligned. Make sure that curling at the leading edge is within the following tolerances: More than 30mm Feed direction Less than 3mm Top of the paper Read surface Less than 5mm Top of the paper Feed direction Read surface fi-5015C Image Scanner Operator's Guide
  • Fujitsu FI 5015C | Operator's Guide - Page 28
    be less than 50 sheets. Setting more than 50 sheets may cause paper jam or reading problem. • When scanning with the ADF, make sure that no documents are placed on the flatbed. Any documents on the flatbed will raise the flatbed cover and cause deterioration of image quality. 2. Fan the documents
  • Fujitsu FI 5015C | Operator's Guide - Page 29
    of the documents. If there is any clearance between the side guides and the edges of documents, the scanned image may be skewed. BASIC SCANNER OPERATIONS 6. Scan the documents. For how to scan the document, refer to "2.4 Scanning Documents" on page.18. fi-5015C Image Scanner Operator's Guide 15
  • Fujitsu FI 5015C | Operator's Guide - Page 30
    2.3 Loading Document on Flatbed CAUTION Do not look directly at the light source during the . • Do not press or open the document cover during scanning. ■ Scanning Thick Documents with Flatbed When scanning a thick document such as a book, please remember the following notes. 1. The document
  • Fujitsu FI 5015C | Operator's Guide - Page 31
    2.3 Loading Document on Flatbed ■ Document Size For Flatbed: Minimum 26 (Width ) x 26 (Length) mm Maximum 216 (Width ) x following driver screen. • Paper Size setting Select Paper Size A5L, in the following driver screen. BASIC SCANNER OPERATIONS . fi-5015C Image Scanner Operator's Guide 17
  • Fujitsu FI 5015C | Operator's Guide - Page 32
    Windows] - [ScandAll 21]. ⇒This starts up ScandAll 21. 3. Select the scanner to use. Select [Select Source] from the [Scan] menu. ⇒The [Select Source] dialog box appears. Select "FUJITSU fi-5015C" and click the [Select] button. 4. Click the [Scan To View] button on the tool bar. ⇒The [TWAIN Driver
  • Fujitsu FI 5015C | Operator's Guide - Page 33
    the Scanner Driver" on page 20 Select ADF or Flatbed 2 Select Paper Size ⇒The images of scanned documents are displayed on the [ScandAll 21] window. BASIC SCANNER OPERATIONS For details on functions and operations of ScandAll 21, refer to the description in the [Help] menu. fi-5015C Image
  • Fujitsu FI 5015C | Operator's Guide - Page 34
    [Select] button. Select [FUJITSU fi-5015C] then click the [Select] button. 4) Load the documents on the scanner. For details on loading documents, refer to "2.2 Loading Documents on ADF" on page 12 and "2.3 Loading Document on Flatbed" on page 16 5) Open the TWAIN Driver window. Select [Scan To View
  • Fujitsu FI 5015C | Operator's Guide - Page 35
    . For details, refer to the [Help] menu. 6) Configure settings for scanning and click the [Scan] button. BASIC SCANNER OPERATIONS For details about the settings on this window, refer to "Setting Window for FUJITSU TWAIN32 Scanner Driver" on page 23. fi-5015C Image Scanner Operator's Guide 21
  • Fujitsu FI 5015C | Operator's Guide - Page 36
    on the [ScandAll 21] window. Depending on the settings of the application software, images may not be displayed. For details, refer to the documentation or Help file of your application. e.x.) When you select [To File...] from the [Scan] menu of ScandAll 21, images of scanned documents are not
  • Fujitsu FI 5015C | Operator's Guide - Page 37
    of documents to be scanned from the list. Windows for customizing the paper size will appear when you click on [...] by the list. You can save any document size as a customized setting (up to three) or for changing the order of the paper size in the list. fi-5015C Image Scanner Operator's Guide 23
  • Fujitsu FI 5015C | Operator's Guide - Page 38
    You can confirm the image of the documents in the preview window. [Close] button Saves the current settings and closes this window. [Reset] button Undoes change opetation. [Help] button Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pressing the [F1] key. [About
  • Fujitsu FI 5015C | Operator's Guide - Page 39
    . [Advance...] button Click this button for settings of the advanced image processing. You can set Dropout Color, Reverse, etc. Also Gamma Pattern by custom settings, [Config details of each function, refer to the "FUJITSU TWAIN32 Scanner Driver Help". fi-5015C Image Scanner Operator's Guide 25
  • Fujitsu FI 5015C | Operator's Guide - Page 40
    ISIS Scanner Driver FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver. The
  • Fujitsu FI 5015C | Operator's Guide - Page 41
    started according to the settings of the selected profile. Go to the procedure 9. 6) Open the window of ISIS Driver. Select the [Scan] tab and click the [Scanner Settings] on the [Profile Editor] window. ⇒The configuration window of ISIS driver appears. fi-5015C Image Scanner Operator's Guide 27
  • Fujitsu FI 5015C | Operator's Guide - Page 42
    box, refer to "Configuration Window of FUJITSU ISIS Scanner Driver" on page 29. 8) The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog. 9) Load the documents on the scanner. 10) Click the [Scan] button. ⇒Scanned images are displayed on the window. Refer to the
  • Fujitsu FI 5015C | Operator's Guide - Page 43
    image, but requires much more memory. Halftone Selects the halftone pattern for halftone scanning. This setting is available when "Black & White" is selected in the "Image Mode". Dither Pattern 0 This setting is suitable for scanning dark photo- graphs. fi-5015C Image Scanner Operator's Guide
  • Fujitsu FI 5015C | Operator's Guide - Page 44
    scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 100 (high [sharp]). Increasing this value makes the contrast sharper. Paper Source Selects the scanning method. Automatic ADF Flatbed Automatically switches the method between ADF scanning and flatbed scanning
  • Fujitsu FI 5015C | Operator's Guide - Page 45
    2.5 How to use the Scanner Driver [Scan Area...] button Opens the Scan Area dialog box. Specify scan area for the document size. The size can be set by dragging the frame with mouse. Otherwise, enter any value for the setting. 2 BASIC SCANNER OPERATIONS fi-5015C Image Scanner Operator's Guide 31
  • Fujitsu FI 5015C | Operator's Guide - Page 46
    color is selected, the scanner reads only the text and eliminates (drops out) the red frame. If you do not wish to have any colors dropped out select "None". Reverse Colors of scanned images are reversed. [Setup IPC...] button You can configure settings for scanning with Image Processing Software
  • Fujitsu FI 5015C | Operator's Guide - Page 47
    use the Scanner Driver 2 BASIC SCANNER OPERATIONS Download You can download and use any Gamma pattern. Custom You can specify the numeric values of items such as "Gamma", "Brightness", "Contrast". "About" tab Displays the version number of ISIS driver. fi-5015C Image Scanner Operator's Guide 33
  • Fujitsu FI 5015C | Operator's Guide - Page 48
    34
  • Fujitsu FI 5015C | Operator's Guide - Page 49
    to clear the paper jam, perform daily maintenance and cleaning. 3 CAUTION Be careful, the inside of ADF (automatic document feeder) may become hot during the operation. 3.1 How to clear the paper jam 36 3.2 Cleaning...37 3.3 Replacing Consumable 42 fi-5015C Image Scanner Operator's Guide 35
  • Fujitsu FI 5015C | Operator's Guide - Page 50
    follow the procedure below to remove jammed paper. 1) Remove the documents from the ADF paper chute. 2) Open the ADF. . CAUTION Be careful, the ADF may close and pinch your fingers. 3) Remove the jammed paper. ATTENTION Staples, paper clips, etc. cause document jams. Be sure to fully check the
  • Fujitsu FI 5015C | Operator's Guide - Page 51
    -0013 1 bottle Moisten a cloth with this fluid and wipe the scanner clean. MAINTENANCE Lint-free dry cloth - Commercially available one For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner. fi-5015C Image Scanner Operator's Guide 37
  • Fujitsu FI 5015C | Operator's Guide - Page 52
    3.2.2 Cleaning the Flatbed ATTENTION • Detergent for cleaning windows or glass cleaner can be used instead of cleaning fluid. However, do ATTENTION Be careful not to allow moisture to get inside the device during cleaning. 3. Wait for cleaned parts to dry. 4. Gently close the document cover. 38
  • Fujitsu FI 5015C | Operator's Guide - Page 53
    least 15 minutes to let the glass cool down. 1. Open the ADF. CAUTION Be careful, the ADF may close and pinch your fingers. 2. Clean the following locations with a lint-free cloth moistened with the Cleaner F1. Pick roller unit Pinch rollers Pad ASSY fi-5015C Image Scanner Operator's Guide 39
  • Fujitsu FI 5015C | Operator's Guide - Page 54
    Clean Pinch roller softly not to damage its surface. Try to remove any black stain which may degrade the performance of paper feeding 3. Push in the center of the ADF to return it to its original position, until it clicks. ATTENTION Close the ADF until it clicks. Paper jams or feeding errors may
  • Fujitsu FI 5015C | Operator's Guide - Page 55
    4. Open the Flatbed cover and clean the following locations. 3.2 Cleaning 3 ATTENTION The glass surface under the ADF becomes hot during the operation of the scanner. MAINTENANCE fi-5015C Image Scanner Operator's Guide 41
  • Fujitsu FI 5015C | Operator's Guide - Page 56
    is required to replace consumable periodically. Otherwise, the scanner may not function properly. Part number and recommended replacement cycle is, No. Name 1 Pad ASSY 2 Pick roller unit Part Number PA03209-0550 PA03209-0551 Replacement Cycle Up to 20,000 sheets, or 1 year Up to 100,000
  • Fujitsu FI 5015C | Operator's Guide - Page 57
    , double click the [Scanners and Cameras] icon. MAINTENANCE ⇒The [Scanners and Cameras] window is displayed. 4. Right click the "fi-5015C", and select [Properties] from the menu (for Windows Me, Windows XP), or double click (for Windows98, Windows 2000) fi-5015C Image Scanner Operator's Guide 43
  • Fujitsu FI 5015C | Operator's Guide - Page 58
    ⇒The [fi-5015C Properties] dialog box appears. 5. Click the "Device Set" tab. ⇒The following panel appears. You can confirm the following information on this panel: • Total number of scans with ADF and Flatbed. • Pad and Pick roller counter (approximate number of scans after resetting the counter)
  • Fujitsu FI 5015C | Operator's Guide - Page 59
    again]. To stop scanning and replace the consumable, click the [Cancel] button. 3.3.3 Replacing the Pad ASSY 1. Remove all documents from the ADF paper chute. 2. Open the ADF. MAINTENANCE CAUTION Be careful, the ADF may close and pinch your fingers. fi-5015C Image Scanner Operator's Guide 45
  • Fujitsu FI 5015C | Operator's Guide - Page 60
    feeding errors may occur. 5. Press the center of the ADF to close it until it clicks. 6. Reset the pad counter. 1) Check that the scanner is connected to your PC and turn on the scanner. 2) Open the [Scanners and Cameras] from the control panel of your PC. 3) Open the [Properties] of [fi-5015C
  • Fujitsu FI 5015C | Operator's Guide - Page 61
    4) Click the "Device Set" tab. 3.3 Replacing Consumable MAINTENANCE 3 5) After clicking the [Clear] button beside "Pad" in "Page Counter", click the [OK] button. ⇒The following window appears. Click the [OK] button. The Pad counter returns to "0". fi-5015C Image Scanner Operator's Guide 47
  • Fujitsu FI 5015C | Operator's Guide - Page 62
    the Pick roller unit 1. Remove all documents from the ADF paper chute. 2. Open the ADF. CAUTION Be careful, the ADF may close and pinch your fingers. 3. Remove the Pick roller unit from the scanner. 1) Pinch the fixture with your fingers with another hand holding the Pick roller unit. 48
  • Fujitsu FI 5015C | Operator's Guide - Page 63
    in the following photos. ATTENTION Make sure that the end of the Pick roller unit shaft is correctly inserted in the shaft hole. Otherwise the ADF will not be closed completely. 2) Lock the fixture in the original place to fix the Pick roller unit. fi-5015C Image Scanner Operator's Guide 49
  • Fujitsu FI 5015C | Operator's Guide - Page 64
    the center of the ADF to close it until it clicks. 6. Reset the Pick roller counter. 1) Check that the scanner is connected to your PC and turn on the scanner. 2) Open the [Scanners and Cameras] from the control panel of your PC. 3) Open the [Properties] of [fi-5015C] from the [Scanners and Cameras
  • Fujitsu FI 5015C | Operator's Guide - Page 65
    Chapter 4 TROUBLESHOOTING This chapter describes how to remedy troubles and items to check before contacting the agent where you bought the scanner. 4 4.1 Error Indications in the Function Number Display 52 4.2 Troubleshooting...54 fi-5015C Image Scanner Operator's Guide 51
  • Fujitsu FI 5015C | Operator's Guide - Page 66
    " on page 12. ) Turn off the scanner power. Confirm/ Connect the ADF cable, then turn on the scanner power. The Error Recover Guide is stored in Setup CD-ROM. For installing the HINT application software, refer to "2.1 Installing the Scanner Application" in fi- 5015C Getting Started. 52
  • Fujitsu FI 5015C | Operator's Guide - Page 67
    E7 Trouble occurred in the internal ber Display, contact the dealer where memory (EEPROM). you purchased the scanner or an authorized FUJITSU scanner service Eb A LSI error provider. Ec An error in the memory Ed An error with USB chip 4 TROUBLESHOOTING fi-5015C Image Scanner Operator
  • Fujitsu FI 5015C | Operator's Guide - Page 68
    the alarm or the error. Turn off and on the power button. If this does not eliminate the alarm state, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. Clean the glass following the instructions in the Operator's Guide "3. Maintenance". Load the
  • Fujitsu FI 5015C | Operator's Guide - Page 69
    Pinch rollers. Refer to the Operator's Guide "3.2.3 Cleaning the ADF" on page 39.. Adjust the [Sub-scan Setting] on [Scanners and Cameras] in the control panel. TROUBLESHOOTING 4 * "Multi feed" means that more than 2 papers are fed at the same time. fi-5015C Image Scanner Operator's Guide 55
  • Fujitsu FI 5015C | Operator's Guide - Page 70
    56
  • Fujitsu FI 5015C | Operator's Guide - Page 71
    SCANNER SPECIFICATIONS ■ Basic Specifications Item Dimension (mm) Width 328 (12.9 in.) Weight(kg)/lb 5.5 (11.7 lbs) Input power Voltage AC100 to 240V Phases Single Frequency 50 / 60Hz Power shipping -20 to 60 ° C (-4 to 140 ° F) 8 to 95% A fi-5015C Image Scanner Operator's Guide AP-1
  • Fujitsu FI 5015C | Operator's Guide - Page 72
    ■ Dimensions 175 (6.88 in.) 175 (6.88 in.) Unit: millimeters 447 (17.6 in.) 328 (12.9 in.) AP-2
  • Fujitsu FI 5015C | Operator's Guide - Page 73
    For the case of Windows XP, select an event for starting up any application from the [Select an event] menu. B The events available for this function are: - Scan Button (When pressing the [Scan] button) - Send to 1- 9 (When pressing the [Send to] button) fi-5015C Image Scanner Operator's Guide AP-3
  • Fujitsu FI 5015C | Operator's Guide - Page 74
    under [Actions] and select the application and process from the menu. 6. Click the [OK] button. The window and operations may vary depending on your OS. HINT ■ Settings on the Scanner Function number display (WPEVKQP 5GPFVQ 5ECP 2QYGT Function button Send to button Scan button • To use the
  • Fujitsu FI 5015C | Operator's Guide - Page 75
    you press the [Function] button, the number displayed will change in the order presented below. "1, 2, 3...9, C, 1, 2, 3,..." ⇒Simply pressing the [Send to] button starts the linked application B fi-5015C Image Scanner Operator's Guide AP-5
  • Fujitsu FI 5015C | Operator's Guide - Page 76
    AP-6
  • Fujitsu FI 5015C | Operator's Guide - Page 77
    separation An image processing method in which the scanner automatically detects difference between text and photos, and chooses the threshold accordingly. This function allows the scanner to switch between line mode and half tone mode in one pass. fi-5015C Image Scanner Operator's Guide AP-7
  • Fujitsu FI 5015C | Operator's Guide - Page 78
    and corrected for the output image. Brake roller A roller that prevents two or more sheets of paper from being fed simultaneously into the ADF. Brightness Refers to the brightness of scanned images in this manual. Canadian DOC Regualtions "A standard issued by Industry Canada, a department of
  • Fujitsu FI 5015C | Operator's Guide - Page 79
    Driver software In this manual, driver software refers to software that allows the scanning application software to communicate with the scanner. Dropout color C A color which is used in the document but does not appear in the read image the world. fi-5015C Image Scanner Operator's Guide AP-9
  • Fujitsu FI 5015C | Operator's Guide - Page 80
    manufacturer for service. Error diffusion High-quality halftone (pseudo-grayscale) image production Part 15 of the FCC regulations mentioned in this manual power transmitters and the operation of certificated transmitters without a license. Feeds rollers Rollers that feed documents through the ADF
  • Fujitsu FI 5015C | Operator's Guide - Page 81
    An image is scanned with specified parameters. Interface The connection that allows communication from the computer to the scanner. Inversion (Reverse-image reading) In reverse-image reading, data is changed from black to white and vice versa. C fi-5015C Image Scanner Operator's Guide AP
  • Fujitsu FI 5015C | Operator's Guide - Page 82
    install the driver software of the same standard. Jaggy images Images that have sharp projections or irregular shape on their edges. Job separation sheet A sheet and line art images. Multi Feed detection A scanner function which detects accidental feeding of multiple sheets into the ADF. This can be
  • Fujitsu FI 5015C | Operator's Guide - Page 83
    between black and white areas is traced and the outline extracted for closed areas. Pad ASSY (Pad Assembly) This part is used to separate a sheet of paper from a batch before feeding documents into the ADF. This assembly is made out of rubber. C fi-5015C Image Scanner Operator's Guide AP-13
  • Fujitsu FI 5015C | Operator's Guide - Page 84
    images such as photographs having gradations. Pick roller Roller(s) that picks the page from the batch of paper in the paper chute and feed it into the ADF. Pick start time The period from the manual , used to connect devices such as hard disks, scanners, etc. Up to seven devices can be connected
  • Fujitsu FI 5015C | Operator's Guide - Page 85
    Separation roller A roller that separates the sheets of paper install optional board provided by Fujitsu or interface board manufactured by a third party. Threshold A value used as a metric for judging a color as black or white. For scanning an image " fi-5015C Image Scanner Operator's Guide AP-15
  • Fujitsu FI 5015C | Operator's Guide - Page 86
    standard for API (Application Program Interface) or protocol for imaging devices (scanners, digital cameras, etc.) developed by TWAIN Working Group. In order to use devices that comply with this standard, it is necessary to install driver software based on the same standard. Ultrasonic sensor A type
  • Fujitsu FI 5015C | Operator's Guide - Page 87
    1 Scanning Documents 18 Send to (button 5 Setting Window for FUJITSU TWAIN32 Scanner Driver 23 Shipping lock 4 Side guide 2, 15 T Troubleshooting 51 Turning ON/OFF the Scanner 8 U USB connector 3 Using the (Scan) or (Send to) button ......... 3 fi-5015C Image Scanner Operator's Guide IN-1
  • Fujitsu FI 5015C | Operator's Guide - Page 88
    fi-5015C Image Scanner Operator's Guide P3PC-1592-01ENZ0 Date of issuance: February, 2006 Issuance responsibility: PFU LIMITED z The contents of this manual are subject to change without notice. z PFU LIMITED is not liable whatsoever for any damages resulting from the use of this scanner and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Operator's Guide
fi-5015C Image Scanner
P3PC-1592-01ENZ0