Fujitsu FI 5015C Operator's Guide - Page 27
Loading Documents on ADF, fi-5015C Image Scanner Operator's Guide - sheet fed scanner
UPC - 097564307713
View all Fujitsu FI 5015C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.2 Loading Documents on ADF • Documents that are not square or rectangular • Very thin documents Do not use the following documents: • Paper-clipped or stapled documents • Documents on which the ink is still wet • Documents other than paper such as fabric, metal foil, or transparencies HINT • When scanning semi-transparent documents, slide the [Brightness] bar 2 to light to avoid bleed through. • To prevent the rollers from becoming dirty, avoid scanning documents containing large areas written or filled in pencil. If scanning of such doc- uments is unavoidable, clean the rollers frequently BASIC SCANNER OPERATIONS ATTENTION • Carbonless paper contains chemical substances that may damage the Pad ASSY or rollers (e.g. Pick roller) when these types of documents are fed. Pay attention to the following: Cleaning: If pick errors occur frequently, clean the Pad ASSY. For details on cleaning the Pad ASSY, refer to "3.2.3 Cleaning the ADF" on page 39. Replacing parts: The service lives of the Pad ASSY and Pick roller ASSY are sometimes shortened when scanning medium-grade paper documents. • When documents of Wood containing paper are scanned, the life of Pad ASSY and Pick roller ASSY may be shorter compared with the case where the manuscript of Woodfree paper is scanned. When using the ADF, the leading edge of all document sheets must be HINT evenly aligned. Make sure that curling at the leading edge is within the following tolerances: More than 30mm Feed direction Less than 3mm Top of the paper Read surface Less than 5mm Top of the paper Feed direction Read surface fi-5015C Image Scanner Operator's Guide 13