Fujitsu FI-6770A Getting Started Guide - Page 13
Attach the Stacker and the ADF Paper Chute to the scanner., Gently close the Document Cover.
UPC - 097564307485
View all Fujitsu FI-6770A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 Installing the Scanner 3) Gently close the Document Cover. 4) Change the position of the ADF. CAUTION • Be careful not to pinch your fingers when moving the ADF. • Never rotate the ADF by more than 180 degree. Doing so may damage the ADF. The ADF can be set to any of the following three positions: After repositioning the ADF, be sure that the ADF is firmly locked to the new position. ■ Traditional (Factory default) ■ Standard (Space-saving type and for right-handed operators) Slide the ADF toward the center of the scanner. Note the following explanation in this manual is based upon this standard type of the scanner. ■ Reversed (Space-saving type and for left-handed operators) Slide the ADF toward the center of the scanner, and then rotate it counterclockwise by 180 degree. 4 Attach the Stacker and the ADF Paper Chute to the scanner. 1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner. 2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner. Protruding section Hook 13