Garmin AIS 600 Instructions - Page 3
AIS 600 Wiring Layout: AIS 600 Connected to a Chartplotter through a NMEA 2000 Network, Notes - installation instructions
View all Garmin AIS 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
AIS 600 Wiring Layout: AIS 600 Connected to a Chartplotter through a NMEA 2000 Network GA 30 GPS antenna* (included) RF cable to VHF antenna (not included) AIS 600 RF interconnect cable (included) GPS 17x GPS antenna* (not included) VHF radio** (optional - not included) SRM cable - included NMEA 2000 network-page 7 VHF radio power NMEA 2000 network power (not included) Chartplotter power Chartplotter (optional - not included) Silent-mode switch (optional - not included) SRM message switch (optional - not included) NMEA 2000 drop cable (included) AIS 600 power/data cable (included) See page 8 for silent mode and SRM message wiring assignments 12 or 24 Vdc Notes: * The AIS 600 must be connected to the included GA 30 GPS antenna. The AIS 600 does not share GPS information with any other devices on the boat. If you have a chartplotter on your boat, it must receive GPS information from a separate antenna, such as a GPS 17x. ** The AIS 600 does not need to be installed alongside a VHF radio, but they can share the same VHF antenna if they are both installed on your boat. AIS 600 Instructions