Garmin AIS 600 Instructions - Page 4

AIS 600 Wiring Layout: AIS 600 Connected to a Garmin Chartplotter through NMEA 0183 GA 30 GPS antenna* (included) RF cable to VHF antenna (not included) RF interconnect cable (included) VHF radio** (optional - not included) AIS 600 transceiver box Silent-mode switch (optional - not included) SRM switch (optional - not included) See page 8 for silent mode and Safety-Related Message (SRM) wiring assignments VHF radio power Wire color [function] > Gray [Tx A (+)] > Pink [Tx B (-)] Yellow [power toggle] Wire color [function]*** White [Rx A (+)] > Orange/White [Rx B (-)]> Orange [power toggle] Chartplotter power Garmin NMEA 0183compatible chartplotter (optional - not included) 12 or 24 Vdc Notes: * The AIS 600 must be connected to the included GA 30 GPS antenna. The AIS 600 does not share GPS information with any other devices on the boat. If you have a chartplotter on your boat, it must receive GPS information from a separate antenna, such as a GPS 17x. ** The AIS 600 does not need to be installed alongside a VHF radio, but they can share the same VHF antenna if they are both installed on your boat. *** The listed wire colors are for the NMEA 0183 Port 1 input on a Garmin GPSMAP 4000/5000/6000/7000 series chartplotter. Refer to the installation instructions provided with your Garmin chartplotter if you want to wire the AIS 600 to a different model of Garmin chartplotter or to a different NMEA 0183 port on a GPSMAP 4000/5000/6000/7000 series chartplotter. If you are connecting the AIS 600 to a non-garmin chartplotter, see page 8 for detailed wiring assignments.  AIS 600 Instructions