Garmin Alpha 300 Owners Manual - Page 24

Garmin Explore The Garmin Explore website and app allow you to create courses, waypoints, and collections, plan trips, and use cloud storage. They offer advanced planning both online and offline, allowing you to share and sync data with your compatible Garmin device. You can use the app to download maps for offline access, and then navigate anywhere without using your cellular service. You can download the Garmin Explore app from the app store on your phone, or you can go to explore.garmin .com. Contact Tracking You can track other hunters so you know where they are at all times. You can also send messages to your contacts. One Alpha handheld device can track up to 20 devices, including compatible dog collar devices and handheld devices. Turning On and Off the Transmitter Before you can add a contact or initiate an emergency alert, you must ensure the transmitter is enabled. NOTE: In cold temperatures, if you transmit when the battery is low, the device may shut down. 1 Press to open the status page. 2 Select My ID > Transmitting. Methods to Add a Contact to a Handheld Device Using MURS/VHF: Allows you to add a handheld device contact after you have placed your handheld device into pairing mode. This method is helpful when you are adding a new device to the system prior to leaving for the hunt (Adding a Contact Using Wireless Pairing, page 18). Entering the device ID: Allows you to add a handheld device contact that is not in the area. This method requires the contact to find and communicate their handheld device code to the person adding the device contact. This method is helpful when you would like to add a handheld device contact during a hunt, but you are not near the device. For example, if you are adding another member of your hunting party to your handheld device, but you do not own the device (Adding a Contact Using a Contact ID, page 19). Sharing wirelessly using ANT+ wireless technology: Allows you to add a handheld device that you do not own as a contact. This method does not require the contact to find and communicate their device code to the person adding the device. The two handheld devices must be within a range of 3 m (10 ft.) to share data wirelessly. This method is helpful when you want to add a handheld device during a hunt without entering the device ID (Adding a Contact Using Wireless Pairing, page 18). Adding a Contact Using Wireless Pairing Before you can add a contact wirelessly, you should be near the contact's handheld device. 1 Select Dog List > . 2 Select an option: • On your handheld device select Add > Pair Handheld, and follow the on-screen instructions. • To add a contact by receiving the information from the contact's handheld device, select Add > Receive from Handheld. 3 After successfully adding the contact, enter the name of the contact, and select . The contact is added to your handheld device. You can repeat this procedure using another hunter's handheld device to add your contact ID to that device. 18 Contact Tracking