Garmin GDL 59 – Data Logger & Wi-Fi Datalink Installation Manual - Page 16

Cooling Air, Mounting Requirements

Get Garmin GDL 59 – Data Logger & Wi-Fi Datalink PDF manuals and user guides View all Garmin GDL 59 – Data Logger & Wi-Fi Datalink manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Ensure that routing of the wiring does not come in contact with sources of heat or RF/EMI interference. Check that there is ample space for the cabling and mating connectors. Avoid sharp bends in cabling and routing near aircraft control cables. 2.5 Cooling Air No cooling air is needed for the GDL 59. 2.6 Mounting Requirements The GDL 59 mounting surface should be capable of providing a sufficient electrical bond to the aircraft to minimize radiated EMI and provide protection from High-Intensity Radiation Fields (HIRF). The GDL 59 can be mounted using the G1000 main system (modular) rack, or the unit may be mounted remotely if desired. Figure 2-1 shows the GDL 59 modular unit rack. The unit rack is fastened to the main system rack using the nutplate kit listed in Section 2.3. Refer to the Figure A-1 GDL 59 Modular Rack Outline Drawing for nutplate placement locations. The stand-alone rack is available for remote mounting. The installer must provide any additional remote mounting equipment. Figure 2-1. GDL 59 Modular Unit Rack Page 2-2 Revision C GDL59 Installation Manual 190-00837-00

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
Page 2-2
GDL59 Installation Manual
Revision C
190-00837-00
Ensure that routing of the wiring does not come in contact with sources of heat or RF/EMI interference.
Check that there is ample space for the cabling and mating connectors.
Avoid sharp bends in cabling and
routing near aircraft control cables.
2.5
Cooling Air
No cooling air is needed for the GDL 59.
2.6
Mounting Requirements
The GDL 59 mounting surface should be capable of providing a sufficient electrical bond to the aircraft to
minimize radiated EMI and provide protection from High-Intensity Radiation Fields (HIRF).
The
GDL 59 can be mounted using the G1000 main system (modular) rack, or the unit may be mounted
remotely if desired.
Figure 2-1 shows the GDL 59 modular unit rack.
The unit rack is fastened to the main system rack using the nutplate kit listed in Section 2.3.
Refer to the
Figure A-1 GDL 59 Modular Rack Outline Drawing for nutplate placement locations.
The stand-alone rack is available for remote mounting.
The installer must provide any additional remote
mounting equipment.
Figure 2-1.
GDL 59 Modular Unit Rack