Garmin GMR xHD3 Radar Installation Instructions - Page 6
on the threaded rods.
View all Garmin GMR xHD3 Radar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 From under the mounting surface, place the shoulder washers on the threaded rods and feed them into the mounting surface so they fit securely. 4 Place the flat washers , lock washers , and hex nuts on the threaded rods. 5 Torque the hex nuts to 1.5 kgf-m (130 lbf-in. [11 lbf-ft.]) to securely fasten the radar to the surface without damaging the radar or the mounting hardware. 6
3
From under the mounting surface, place the shoulder washers
on the threaded rods and feed them into
the mounting surface so they fit securely.
4
Place the flat washers
, lock washers
, and hex nuts
on the threaded rods.
5
Torque the hex nuts to 1.5 kgf-m (130 lbf-in. [11 lbf-ft.]) to securely fasten the radar to the surface without
damaging the radar or the mounting hardware.
6