Garmin GND 10 Black Box Bridge Installation Instructions - Page 3

Status LEDs, Specifications

Get Garmin GND 10 Black Box Bridge PDF manuals and user guides View all Garmin GND 10 Black Box Bridge manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

1 Connect the included USB cable to the USB port on the device. 2 Connect the other end of the USB cable to an open USB port on your computer. The LED near the USB port flashes green when the device is correctly connected to your computer. The correct driver should be installed automatically by the Windows® operating system. 3 If the correct driver is not installed automatically, download and install the driver from www.garmin.com. 4 After the device is connected correctly to the computer, download the NexusRace software from www.garmin.com and install it. Status LEDs The status LEDs are located on the product label near the ports and can help when troubleshooting problems. NMEA 2000 Status LED Color and Activity Off Solid red Flashing green Flashing orange Flashing red Status There is no power over the NMEA 2000 network. The device is turning on. The device is operating properly. The device software is being updated. The device has encountered an error. Contact Garmin product support for assistance. NEXUS and USB Status LED Color and Activity Flashing green Flashing orange Flashing red Status The connected device is operating properly. The connected device is initializing. The connected device has encountered an error. Contact Garmin product support for assistance. Specifications Specification Dimensions (H×W×D) Weight Temperature range Compass-safe distance Waterproof rating Power usage NMEA 2000 input voltage NMEA 2000 load equivalency number (LEN) Measurement 170 x 90 x 50 mm (6. 7 x 3. 5 x 2 in. ) 196 g (6. 9 oz. ) From 5° to 158°F (from -15° to 70°C) 10 cm (3. 9 in. ) IPX7 (protected against water immersion for 30 minutes at a depth of 1 m (3 ft. )) 0. 85 W max. From 9 to 16 Vdc 4 (200 mA at 9 Vdc) NMEA 2000 PGN Information Type PGN Description Transmit and receive 059392 ISO acknowledgment 059904 ISO request 060928 ISO address claim 126208 Command, request, and acknowledge group function 129026 COG and SOG : Rapid update 129029 GNSS position data 129540 GNSS satellites in view Transmit 126996 Product information 127250 Vessel heading 128259 Speed: Water referenced Type Receive PGN Description 130306 Wind data 130310 Environmental parameters 130311 Environmental parameters 130312 Temperature 130314 Actual pressure 130316 Temperature, extended range 065240 ISO commanded address 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1
Connect the included USB cable to the USB port on the
device.
2
Connect the other end of the USB cable to an open USB port
on your computer.
The LED near the USB port flashes green when the device is
correctly connected to your computer.
The correct driver should be installed automatically by the
Windows
®
operating system.
3
If the correct driver is not installed automatically, download
and install the driver from
www.garmin.com
.
4
After the device is connected correctly to the computer,
download the NexusRace software from
www.garmin.com
and install it.
Status LEDs
The status LEDs are located on the product label near the ports
and can help when troubleshooting problems.
NMEA 2000 Status
LED Color and
Activity
Status
Off
There is no power over the NMEA 2000
network.
Solid red
The device is turning on.
Flashing green
The device is operating properly.
Flashing orange
The device software is being updated.
Flashing red
The device has encountered an error. Contact
Garmin product support for assistance.
NEXUS and USB Status
LED Color and Activity
Status
Flashing green
The connected device is operating
properly.
Flashing orange
The connected device is initializing.
Flashing red
The connected device has encountered an
error. Contact Garmin product support for
assistance.
Specifications
Specification
Measurement
Dimensions (H×W×D)
170 x 90 x 50 mm (6.7 x 3.5 x 2 in.)
Weight
196 g (6.9 oz.)
Temperature range
From 5° to 158°F (from -15° to 70°C)
Compass-safe distance
10 cm (3.9 in.)
Waterproof rating
IPX7 (protected against water immersion
for 30 minutes at a depth of 1 m (3 ft.))
Power usage
0.85 W max.
NMEA 2000 input voltage
From 9 to 16 Vdc
NMEA 2000 load
equivalency number (LEN)
4 (200 mA at 9 Vdc)
NMEA 2000 PGN Information
Type
PGN
Description
Transmit and receive
059392
ISO acknowledgment
059904
ISO request
060928
ISO address claim
126208
Command, request, and acknowledge
group function
129026
COG and SOG : Rapid update
129029
GNSS position data
129540
GNSS satellites in view
Transmit
126996
Product information
127250
Vessel heading
128259
Speed: Water referenced
Type
PGN
Description
130306
Wind data
130310
Environmental parameters
130311
Environmental parameters
130312 Temperature
130314
Actual pressure
130316
Temperature, extended range
Receive
065240
ISO commanded address
3