Garmin Nuvi 465T Owner's Manual - Page 45
Charging Your nüvi, Changing the Fuse, Removing the nüvi and Mount, vehicle - accessories
UPC - 753759086398
View all Garmin Nuvi 465T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Appendix Charging Your nüvi • Connect the vehicle power cable to the mini-USB connector on your nüvi and to a power outlet in your vehicle. The vehicle key may need to be turned to ON/ACC for the nüvi to charge. • Connect an AC adapter (optional accessory) to the nüvi and a wall outlet. • Connect your nüvi to a computer using the USB cable. The computer must be on for the nüvi to charge. Changing the Fuse Caution: When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper place. If your unit will not charge in your vehicle, you might need to replace the fuse located at the tip of the vehicle adapter. 1. Unscrew the black, round end piece, and remove it. End piece 2. Remove the fuse (glass and silver cylinder), and replace it with a 1 A fast-blow fuse. Silver tip Fuse 3. Ensure that the silver tip is placed in the black end piece. Screw on the black end piece. Removing the nüvi and Mount To remove the nüvi from the cradle, hold onto the cradle and tilt the nüvi forward. To remove the cradle from the mount, turn the cradle to the right or left. Apply pressure in that direction until the cradle snaps off the mount. nüvi 465 owner's manual39