Garmin Nuvi 465T Owner's Manual - Page 8
Setting Up Your nüvi, Attaching the Adhesive Disk, and the Mounting Base to Your, Dashboard - owners manual
UPC - 753759086398
View all Garmin Nuvi 465T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Setting Up Your nüvi Attaching the Adhesive Disk and the Mounting Base to Your Dashboard Note: The permanent adhesive disk is extremely difficult to remove. 1. Clean and dry the area where you want to place the mounting base. 2. Select the adhesive disk you want to use, and remove one side of the backing. 4. Place the mounting base so that the locking lever is facing you. Position the base on the cleaned area. Apply pressure to adhere the base to the dashboard. 5. Snap the cradle onto the mounting arm. Cradle Mounting arm Temporary Disk 6. Slide the mounting arm with cradle attached into the mounting base. Permanent Disk 3. Place the adhesive disk on the bottom of the mounting base, and remove the other side of the backing. Mounting base Locking lever Mounting arm with cradle 7. Slide the locking lever into the locked position. nüvi 465 owner's manual