Garmin SVT for G1000 Pilots Guide - Page 169
Garmin G1000 Pilot's Guide for Cessna Nav III, Displaying/removing airways, AIRWAYS
View all Garmin SVT for G1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE FLIGHT MANAGEMENT Airways may be displayed on the map at the pilot's discretion using either a combination of AIRWAYS Softkey presses, or menu selections using the MENU Key from the Navigation Map Page. The Airway range can also be programmed to only display Airways on the MFD when the map range is at or below a specific number. Displaying/removing airways: 1) Press the MAP Softkey. 2) Press the AIRWAYS Softkey. Both High and Low Altitude Airways are displayed (AIRWY ON). 3) Press the softkey again to display Low Altitude Airways only (AIRWY LO). 4) Press the softkey again to display High Altitude Airways only (AIRWY HI). 5) Press the softkey again to remove High Altitude Airways. No airways are displayed (AIRWAYS). Or: 1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option. 2) Press the ENT Key. The Map Setup Menu is displayed. 3) Turn the small FMS Knob to select the 'Airways' group, and press the ENT Key. 4) Turn the large FMS Knob to highlight the 'AIRWAYS' field. 5) Turn the FMS Knob to select 'Off', 'All', 'LO Only', or 'HI Only', and press the ENT Key. 6) Press the FMS Knob to return to the Navigation Map Page. Airway Display Selection Off, All, LO Only, HI Only Low Altitude Airway Range High Altitude Airway Range Figure 5-23 Navigation Map Setup Menu - AIRWAYS Setup The airway range is the maximum map range on which airways are displayed. Selecting an airway range (LOW ALT AIRWAY or HI ALT AIRWAY): 1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option. 2) Press the ENT Key. The Map Setup Menu is displayed. 3) Turn the small FMS Knob to select the 'Airway' group, and press the ENT Key. 4) Highlight the 'LOW ALT AIRWAY' or 'HI ALT AIRWAY' range field. 5) To change the range setting, turn the small FMS Knob to display the range list. 6) Select the desired range using the small FMS Knob. 7) Press the ENT Key. 8) Press the FMS Knob to return to the Navigation Map Page. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-00498-07 Rev. A Garmin G1000 Pilot's Guide for Cessna Nav III 155