Garmin SVT for G1000 Pilots Guide - Page 243

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT 5.8 PROCEDURES The G1000 can access the whole range of instrument procedures available. Departures (DPs), arrivals (STARs), and non-precision and precision approaches (APPRs) are stored within the database and can be loaded using the Procedures (PROC) Key. The selected procedure for the departure or arrival airport is added to the active flight plan. No waypoints are required to be in the active flight plan to load procedures; however, if the departure and arrival airport are already loaded, the procedure loading window defaults to the appropriate airport, saving some time selecting the correct airport on the Procedure Loading Page. Whenever an approach is selected, the choice to either "load" or "activate" is given. "Loading" adds the approach to the end of the flight plan without immediately using it for navigation guidance. This allows continued navigation via the intermediate waypoints in the original flight plan, but keeps the procedure available on the Active Flight Plan Page for quick activation when needed. "Activating" also adds the procedure to the end of the flight plan but immediately begins to provide guidance to the first waypoint in the approach. DEPARTURES A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be loaded at a time in a flight plan. If a departure is loaded when another departure is already in the active flight plan, the new departure replaces the previous departure. The route is defined by selection of a departure, the transition waypoints, and a runway. LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN Loading a departure into the active flight plan using the PROC Key: 1) Press the PROC Key. The Procedures Window is displayed. 2) Highlight 'SELECT DEPARTURE'. 3) Press the ENT Key. The Departure Loading Page is displayed. 4) Use the FMS Knob to select an airport and press the ENT Key. 5) Select a departure from the list and press the ENT Key. 6) Select a runway (if required) and press the ENT Key. 7) Select a transition (if required) and press the ENT Key. 'LOAD?' is highlighted. 8) Press the ENT Key to load the departure procedure. FLIGHT MANAGEMENT AVOIDANCE HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-00498-07 Rev. A Garmin G1000 Pilot's Guide for Cessna Nav III 229