Garmin Zumo 660 Installation Instructions - Page 2

B) To install the handlebar base to the clutch/brake clamp bracket: Note: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch/brake clamp bracket. 1. Remove the two factory bolts on your clutch/brake clamp bracket. 2. Thread the new bolts through the handlebar base, spacers, and clamp bracket. 3. Tighten the bolts to secure the base. Handlebar base Clutch/brake clamp bracket Spacers Step 3: Attach the Base Plate to the zūmo Mount 1. Thread the M4 × 40 mm panhead screws through the washers, cradle, spacers, and base plate. 2. Tighten the nuts to secure the base plate. Washers Panhead screws Cradle Base plate Nuts Spacers