Garmin Zumo 660 Installation Instructions - Page 4

Mount Your zūmo in an Automobile Before mounting the zūmo, see the Important Safety and Product Information guide in the product box for information about laws pertaining to windshield mounting. Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. 1. Plug the automotive power cable into the connector on the right side of the cradle. Release button Microphone jack (2.5 mm) Cradle Automotive power cable 2. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. 3. Place the suction cup on the windshield. 4. Flip the lever back, toward the windshield. Suction cup mount Warning: Do not use the suction cup mount on a motorcycle. 5. Snap the cradle onto the suction cup arm. 6. Fit the bottom of your zūmo into the cradle. 7. Tilt the zūmo back until it snaps into place. 8. Plug the other end of the automotive power cable into a power outlet. 9. If you are using a traffic receiver in Europe, secure the antenna on the traffic receiver to the windshield using the suction cups. © 2008 Garmin Ltd. or its subsidiaries www.garmin.com Garmin® and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. Other trademarks and trade names are those of their respective owners. January 2009 Part Number 190-01026-02 Rev. A Printed in Taiwan