Garmin nuvi 250 Owner's Manual - Page 35
Changing the Fuse, Removing the nüvi and Mount - cradle
UPC - 753759065539
View all Garmin nuvi 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Changing the Fuse Caution: When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper place. If your unit will not charge in your vehicle, you might need to replace the fuse located at the tip of the vehicle adapter. 1. Unscrew the black, round end piece, End piece Silver tip and remove Fuse it. 2. Remove the fuse (glass and silver cylinder), and replace it with a 3 A fast-blow fuse. Appendix 3. Ensure that the silver tip is placed in the black end piece. Screw on the black end piece. Removing the nüvi and Mount To remove the nüvi from the cradle, hold onto the cradle and tilt the nüvi forward. To remove the cradle from the mount, turn the cradle to the right or left. Apply pressure in that direction until the cradle snaps off the mount. To remove the suction cup mount from the windshield, flip the lever toward you. Pull the tab on the suction cup toward you. nüvi 200 and 200W series owner's manual 29