Garmin nuvi 250 Owner's Manual - Page 36

Appendix Mounting on Your Dashboard Use the enclosed mounting disk to mount your unit to the dashboard and comply with certain state regulations. Caution: The permanent mounting adhesive is extremely difficult to remove after it is installed. 1. Clean and dry the dashboard where you are placing the disk. 2. Remove the backing from the adhesive on the bottom of the disk. 3. Place the disk on the dashboard. 4. Remove the clear plastic cover from the top of the disk. 5. Place the suction cup mount on top of the disk. Flip the lever down (toward the disk). Additional Maps You can purchase additional MapSource map data from Garmin and load the maps in your nüvi internal memory or on an optional memory card. To determine the versions of the maps that are loaded on your nüvi, open the Menu page. Touch Tools > Settings > Map > Map Info. Check http://my.garmin.com/maps/updates .htm to see if an update for your map software is available. To enable additional maps, you need your unit ID (see page 20) and serial number (located near the power connector). To load maps or waypoints in your nüvi memory or on your memory card, select the name for your nüvi 30 nüvi 200 and 200W series owner's manual