Gateway E-4610D 6-bay mBTX Pro Hardware Reference Guide (for computers with Wi - Page 50
Replacing the hard drive
View all Gateway E-4610D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
CHAPTER 4: Upgrading Your Computer 4 Slide the drive release latch toward the back of the computer to the Unlock position, then slide the drive forward and out of the drive bay. 5 Slide the new drive into the drive bay, then slide the drive release latch toward the front of the computer to the Lock position. 6 Reconnect the drive cables using the notes you took previously. 7 Replace the front bezel, then replace the side panel. Replacing the hard drive To replace the hard drive: 1 Remove the side panel by following the instructions in "Opening and closing the case" on page 37. 2 If you are adding a new drive, go to Step 6. If you are replacing an existing drive, go to the next step. 44
CHAPTER 4: Upgrading Your Computer
44
4
Slide the drive release latch toward the back of the
computer to the Unlock position, then slide the drive
forward and out of the drive bay.
5
Slide the new drive into the drive bay, then slide the drive
release latch toward the front of the computer to the
Lock position.
6
Reconnect the drive cables using the notes you took
previously.
7
Replace the front bezel, then replace the side panel.
Replacing the hard drive
To replace the hard drive:
1
Remove the side panel by following the instructions in
“Opening and closing the case” on page 37
.
2
If you are adding a new drive, go to Step
6
. If you are
replacing an existing drive, go to the next step.