Gateway P-6317 8512680 - Component Replacement Manual - Page 9

can only be inserted in one direction. If the module does not fit - power adapter

Page 9 highlights

Replacing a Memory Module 10 Pull the memory module out of the slot. 2 11 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. 12 Replace the memory bay cover, then tighten the cover screws. 13 Insert the battery, then turn your notebook over. 14 Connect the power adapter, modem cable, and network cable 15 Reconnect all peripheral devices and replace any Express cards. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. © 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Replacing a Memory Module
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your
Reference Guide
for important safety, regulatory, and legal information.
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
10
Pull the memory module out of the slot.
11
Hold the new or replacement module at a 30-degree angle and
press it into the empty memory slot. This module is keyed so it
can only be inserted in one direction. If the module does not fit,
make sure that the notch in the module lines up with the tab in
the memory bay.
12
Replace the memory bay cover, then tighten the cover screws.
13
Insert the battery, then turn your notebook over.
14
Connect the power adapter, modem cable, and network cable
15
Reconnect all peripheral devices and replace any Express cards.
2