GE 19230-GE User Manual - Page 2
Required Tools, Included Hardware, Battery Installation, Chime Unit, Push Button
UPC - 043180192301
View all GE 19230-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Required Tools • Flathead screwdriver • Drill • 1/16" drill bit • 5/32" drill bit • Phillips screwdriver Included Hardware: • 2 - Plastic anchors • 4 - Screws • 1 - Double sided Tape • 1 - 12 Volt battery Battery Installation: Chime Unit: 1. Make sure the Chime power is switched to the "OFF" position. 2. Remove battery cover by pressing the tab in the direction of the arrow and lifting at the same time. 3. Install 2 "AA" batteries noting the battery orientation inside the battery compartment. 4. Replace battery cover. Push Button: 1. Remove battery cover by using a small flat screwdriver. 2. Insert flat screwdriver in at the bottom of the Push Button to release the tab. 3. While the flat screwdriver is inserted at the bottom of the Push Button, press downwards to separate the battery cover from the Push Button. 4. Remove plastic tab in between the 12V battery and contact tab to allow button to operate.