GE 19230-GE User Manual - Page 5
Installing the Chime Unit
UPC - 043180192301
View all GE 19230-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5. Press the Push Button on to the back cover by inserting the top of the Push Button onto the top of the back cover first and then pressing on the bottom of the Push Button to snap the bottom of the Push Button into place. Installing the Chime Unit: Note: Avoid mounting the Chime Unit on metal surfaces, as this may result in reduced range of transmission. The Chime Unit should also be mounted no farther than 150 feet from the Push Button. 1. Select a mounting location that is within the No further than 150 feet away 150ft. range. 2. Use the supplied Chime template to mark mounting holes. a. If mounting to sheetrock: i. Using a 5/32nd inch drill bit, drill holes at the marked locations. ii. Insert the two wall anchors supplied iii. Screw in the two screws supplied leaving a ¼" of the screw extended out from the mounting surface. (See 1/4" diagram) iv. Place the Chime Unit's keyholes over the screws and gently press downwards to secure Chime Unit. b. If mounting onto or into wood: i. Using a 1/16th inch drill bit, drill pilot holes at the marked locations. ii. Screw in the two screws supplied leaving a ¼" of the screw extended out from the mounting surface. (See diagram) iii. Place the Chime Unit's keyholes over the screws and gently press downwards to secure Chime Unit.