GE 29451 User Guide - Page 11
Installation
UPC - 044319294514
View all GE 29451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
INSTALLATION IMPORTANT: It is imperative you follow these steps in sequence for proper installation of the phone. Telephone line cords must be connected before AC power connection is made. The phone may not install properly, otherwise. Also, without AC power or the battery installed, pulse dialing and the flash function will not operate. 1. Carefully turn over the phone. On the bottom is the battery compartment door. Remove the screw on the door with a screwdriver and open the door. 2. Install a 9V battery, paying close attention to the battery polarity. Close the battery compartment door, and tighten the screw back in place. Carefully turn the phone over again. Battery compartment door NOTE: The backup battery is important because should you experience a power outage, you will still be able to use the phone. DESKTOP INSTALLATION 1. Connect an end of one of the long telephone line cords to the jack on the back of the phone labeled LINE 1,2. Connect the other end to the 1 wall jack(s) labeled 1 & 2. There are two possibilities for this connection. • One 2-line RJ14 wall jack. Connect the other end of the line cord to the wall jack. OR 7