GE 29451 User Guide - Page 45

Problem, Solution

Get GE 29451 - Business Speakerphone With Intercom PDF manuals and user guides
UPC - 044319294514
View all GE 29451 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Problem Incoming voice too low or none at all. Indicator and tone feedback flutter when dialing in pulse mode Memory dialing doesn't work Battery LOW indicator blinks or is solid Intercom does not function correctly Transfer does not function correctly Display reads Addr- Solution • Check setting of volume control. • This is normal as power is fluctuating as phone dials. • Did you program the memory location keys correctly? • Did you follow proper dialing sequence? • Make sure the pulse/tone mode is programmed correctly. • The 9V battery needs replacing or is not installed. • Make sure lines 1 and 2 are connected properly and common to all phones on the system. • Make sure all station addresses involved have been assigned. • Make sure lines 1 and 2 are connected properly and common to all phones on the system. • Check the connections for lines 3 and 4. • Make sure the extension number has been programmed for lines 3 and 4. • The station address needs to be re-assigned due to a duplicate station address in the system. See "Changing the Station Address". 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
41
Problem
Solution
Incoming voice too low
•
Check setting of volume control.
or none at all.
Indicator and tone
•
This is normal as power is fluctuating as phone dials.
feedback flutter when
dialing in pulse mode
Memory dialing
•
Did you program the memory location keys correctly?
doesn’t work
•
Did you follow proper dialing sequence?
•
Make sure the pulse/tone mode is programmed correctly.
Battery LOW indicator
•
The 9V battery needs replacing or is not installed.
blinks or is solid
Intercom does not
•
Make sure lines 1 and 2 are connected properly and
function correctly
common to all phones on the system.
•
Make sure all station addresses involved have been
assigned.
Transfer does not
•
Make sure lines 1 and 2 are connected properly and
function correctly
common to all phones on the system.
•
Check the connections for lines 3 and 4.
•
Make sure the extension number has been programmed for
lines 3 and 4.
Display reads
Addr-
•
The station address needs to be re-assigned due to a
duplicate station address in the system. See “Changing the
Station Address”.