GE 29451 User Guide - Page 31
Press INTERCOM.
UPC - 044319294514
View all GE 29451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
NOTE: You will hear an error tone if the station address is not valid or not connected to the system. If the station you want to reach is busy, the display will show BUSY and the party will hear a pending tone, alerting him of the intercom. If the party's station is in Do Not Disturb (DND) mode, your station's PRIVACY indicator will flash. To override DND, see "Overriding a Station Using Do Not Disturb". OVERRIDING A STATION USING DO NOT DISTURB 1. Press INTERCOM. 2. Press the memory location for the station you want to reach. If the station is in Do Not Disturb (DND), the display will read DND and the PRIVACY indicator will flash. 3. To override DND, press LOWER, then PRIVACY. The intercom will then ring at the desired station. NOTE: This only overrides the privacy at the station you are trying to reach. All other stations using DND will be unaffected. RECEIVING AN INTERCOM The INTERCOM indicator will flash red to let you know someone is trying to intercom you. The display will also read Int- followed by the station address attempting to reach you. Press INTERCOM. (Pick up the handset or press HEADSET if you want to use it instead.) PAGING ALL STATIONS 1. Lift the handset. 2. Press PAGE and listen for the beep. The other stations will automatically activate their speakphones and receive your page. 3. Talk into the handset. You will have 30 seconds paging in this mode. After 30 seconds, the page will be cancelled. 4. When finished, hang up. NOTE: If no page group number is assigned, all stations will be paged. 27