GE GFWR2705HMC Use and Care Manual - Page 15

Cleaning the Pump Filter

Get GE GFWR2705HMC PDF manuals and user guides View all GE GFWR2705HMC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Cleaning the Pump Filter Due to the nature of the front-load washer, it is sometimes possible for small articles to pass to the pump. The washer has a filter to capture lost items so they are not dumped to the drain. To retrieve lost items, clean out the pump filter. 1. Using a small flathead screwdriver or coin, open the access door. 2. Place a shallow pan or dish under the pump access door and towels on the floor in front of the washer to protect the floor. It is normal to catch about a cup of water when the filter is removed. 3. Pull down the pour spout. Video 4. Turn the pump filter counterclockwise and remove the filter slowly, controlling the flow of the draining water. 5. Remove the filter and clean the debris from the filter. 6. Replace the filter and turn clockwise. Tighten securely. 7. Flip up the pour spout. 8. Close the access door by hooking the bottom tabs first, then rotating the access door shut. Scan this code to watch a video on this topic. GEAppliances.com Pump filter 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
GEAppliances.com
Cleaning the Pump Filter
Due to the nature of the front-load washer,
it is sometimes possible for small articles
to pass to the pump. The washer has a
filter to capture lost items so they are not
dumped to the drain. To retrieve lost items,
clean out the pump filter.
1.
Using a small flathead screwdriver or
coin, open the access door.
2.
Place a shallow pan or dish under
the pump access door and towels
on the floor in front of the washer to
protect the floor. It is normal to catch
about a cup of water when the filter
is removed.
3.
Pull down the pour spout.
4.
Turn the pump filter counterclockwise
and remove the filter slowly, controlling
the flow of the draining water.
5.
Remove the filter and clean the debris
from the filter.
6.
Replace the filter and turn clockwise.
Tighten securely.
7.
Flip up the pour spout.
8.
Close the access door by hooking the
bottom tabs first, then rotating the
access door shut.
Pump
filter
15
Video
Scan this code
to watch a video
on this topic.