GE JBS27DMWW Owners Manual - Page 32

Broil Hi/lo

Page 32 highlights

Before you call for service... Troubleshooting Tips Problem Possible Causes What To Do 2YHQ³$OO0RGHOV Oven light does not work Light bulb is loose or defective. ‡ Tighten or replace the bulb. Switch operating light is broken. ‡ Call for service. Oven will not work Plug on range is not completely inserted in the electrical outlet. A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. ‡ Make sure electrical plug is plugged into a live, properly grounded outlet. ‡ Replace fuse or reset circuit breaker. ‡ See the Using the oven section. On self-cleaning models, door left in the locked position. ‡ If necessary, allow the oven to cool then unlock the door. Food does not bake or roast properly Oven controls improperly set. Rack position is incorrect or the rack is not level. Incorrect cookware or cookware of improper size being used. Oven thermostat needs adjustment. ‡ See the Using the oven section. ‡ See the Using the oven section. ‡ See the Using the oven section. ‡ See the Adjust the oven thermostat-Easy to do yourself! section. Food does not broil properly Oven is not set to BROIL. ‡ On models with a temperature knob, make sure you turn it all the way to the BROIL position. On models with a BROIL HI/LO pad, make sure it is turned on. Improper rack position being used. ‡ See the Broiling guide. Food being cooked in a hot pan. Cookware not suited for broiling. In some areas the power (voltage) may be low. ‡ For best results, use a pan designed for broiling. Make sure it is cool. ‡ For best results, use a pan designed for broiling. ‡ Preheat the broil element for 10 minutes. ‡ Broil for the longest period of time recommended in the Broiling guide. Control signals after entering cooking time or delay start You forgot to enter a bake temperature or cleaning time. ‡ Press the BAKE pad and desired temperature or the SELF CLEAN pad and desired clean time. Display flashes "bAd" then "linE" with a loud tone The installed connection from the house to the unit is miswired. ‡ Contact installer or electrician to correct miswire. Warming drawer will not work 32 A fuse in your home may be blown or the circuit breaker tripped. The oven is self-cleaning. Controls improperly set. ‡ Replace the fuse or reset the circuit breaker. ‡ Wait for the self-clean cycle to finish and the oven to cool. ‡ See the Using the warming drawer section.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Troubleshooting Tips
Before you call for service…
Problem
Possible Causes
What To Do
2YHQ³$OO 0RGHOV
Oven light does not work
Light bulb is loose or defective.
±
Tighten or replace the bulb.
Switch operating light is broken.
±
Call for service.
Oven will not work
Plug on range is not completely
±
Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
grounded outlet.
A fuse in your home may
±
Replace fuse or reset circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set.
±
See the
Using the oven
section.
On self-cleaning models, door
±
If necessary, allow the oven to cool then unlock the door.
left in the locked position.
Food does not bake
Oven controls improperly set.
±
See the
Using the oven
section.
or roast properly
Rack position is incorrect or the
±
See the
Using the oven
section.
rack is not level.
Incorrect cookware or cookware
±
See the
Using the oven
section.
of improper size being used.
Oven thermostat needs
±
See the
Adjust the oven thermostat–Easy to do yourself!
adjustment.
section.
Food does not
Oven is not set to BROIL.
±
On models with a temperature knob, make sure you turn
broil properly
it all the way to the
BROIL
position. On models with a
BROIL HI/LO
pad, make sure it is turned on.
Improper rack position being used.
±
See the
Broiling guide
.
Food being cooked in a hot pan.
±
For best results, use a pan designed for broiling.
Make sure it is cool.
Cookware not suited for broiling.
±
For best results, use a pan designed for broiling.
In some areas the power
±
Preheat the broil element for 10 minutes.
(voltage) may be low.
±
Broil for the longest period of time recommended in
the
Broiling guide.
Control signals after
You forgot to enter a bake
±
Press the
BAKE
pad and desired temperature or the
entering cooking time
temperature or cleaning time.
SELF CLEAN
pad and desired clean time.
or delay start
Display flashes “bAd”
The installed connection
±
Contact installer or electrician to correct miswire.
then “linE” with a
from the house to the unit
loud tone
is miswired.
Warming drawer wil
l
A fuse in your home may be
±
Replace the fuse or reset the circuit breaker.
not work
blown or the circuit breaker
tripped.
The oven is self-cleaning.
±
Wait for the self-clean cycle to finish and the oven to cool.
Controls improperly set.
±
See the Using the warming drawer section.
32