GE JGRS06BEJBB Use and Care Manual - Page 10

Special features of your oven control

Page 10 highlights

Safety Instructions Operating Instructions Special features of your oven control. Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them. The special feature modes can only be activated while the display is showing the time of day clock. They remain in the control's memory until the steps are repeated. When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset. Tones at the End of a Timed Cycle At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds, until the CLEAR/OFF pad is touched. This continuous 6-second beep may be canceled. Touch the BROIL HI/LO pad. The display shows CON BEEP (continuous beep). Touch the BROIL HI/LO pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.) To cancel the 6-second beep: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the START pad. 12-Hour Shut-Off With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function. If you wish to turn OFF this feature, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the DELAY START pad. The display will show 12 shdn (12 hour shut-off). Touch the DELAY START pad again and the display will show no shdn (no shut-off). Touch the START pad to activate the no shut-off and leave the control set in this special features mode. Cook and Hold Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished. To activate this feature, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the COOKING TIME pad. The display will show Hld OFF. Touch the COOKING TIME pad again to activate the feature. The display will show Hld ON. Touch the START pad to activate the cook and hold feature and leave the control set in this special features mode. Troubleshooting Tips Consumer Support 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
Operating Instructions
Safety Instructions
Consumer Support
Troubleshooting Tips
Special features of your oven control.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps
will sound followed by one beep every
6 seconds, until the
CLEAR/OFF
pad is touched.
This continuous 6-second beep may be
canceled.
To cancel the 6-second beep:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until
the display shows
SF
.
Touch the
BROIL HI/LO
pad. The
display shows
CON BEEP
(continuous
beep). Touch the
BROIL HI/LO
pad
again. The display shows
BEEP
. (This
cancels the one beep every 6 seconds.)
Touch the
START
pad.
12-Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or after
3 hours during a broil function.
If you wish to turn
OFF
this feature, follow
the steps below:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until
the display shows
SF.
Touch the
DELAY START
pad. The
display will show
12 shdn
(12 hour
shut-off). Touch the
DELAY START
pad
again and the display will show
no shdn
(no shut-off).
Touch the
START
pad to activate the
no shut-off and leave the control set in
this special features mode.
Your new touch pad control has additional features that you may choose to use. The following are the features and
how you may activate them.
The special feature modes can only be activated while the display is showing the time of day clock. They remain in the
control’s memory until the steps are repeated.
When the display shows your choice, touch the
START
pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
To activate this feature, follow the steps
below:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until
the display shows
SF.
Touch the
COOKING TIME
pad. The
display will show
Hld OFF.
Touch the
COOKING TIME
pad again
to activate the feature. The display will
show
Hld ON.
Touch the
START
pad to activate the
cook and hold feature and leave the
control set in this special features
mode.