GE JGRS06BEJBB Use and Care Manual - Page 11

Operating Instructions, Hour, 24-Hour or Clock Black-Out

Page 11 highlights

Safety Instructions Operating Instructions ge.com 12-Hour, 24-Hour or Clock Black-Out Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour military time clock or black-out the clock display, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the TIMER/CLOCK pad once. The display will show 12 hr. Touch the TIMER/CLOCK pad again to change to the 24-hour military time clock. The display will show 24 hr. Touch the TIMER/CLOCK pad again to black-out the clock display. The display will show OFF. Touch the START pad to activate your choice and leave the control set in this special features mode. NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function. Fahrenheit or Centigrade Temperature Selection Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Centigrade selections. Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the BROIL HI/LO and COOKING TIME pads again at the same time for 2 seconds. The display will show C (Centigrade). Touch the START pad. Touch the BROIL HI/LO and COOKING TIME pads at the same time for 2 seconds. The display will show F (Fahrenheit). Troubleshooting Tips Consumer Support Changing the Speed of the +/- Pads As you use the +/- pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the + pad. The display will show you a set speed between 1 and 5. Touch the + pad to increase the speed up to the number 5. Touch the - pad to decrease the speed down to the number 1. Touch the START pad to activate the setting and leave the control set in this special features mode. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

11
Operating Instructions
Safety Instructions
Consumer Support
Troubleshooting Tips
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black-out the clock
display, follow the steps below:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 2 seconds
until the display shows
SF.
Touch the
TIMER/CLOCK
pad once.
The display will show
12 hr
.
Touch the
TIMER/CLOCK
pad again to
change to the 24-hour military time
clock. The display will show
24 hr
.
Touch the
TIMER/CLOCK
pad again to
black-out the clock display. The display
will show
OFF
.
Touch the
START
pad to activate your
choice and leave the control set in this
special features mode.
NOTE:
If the clock is in the black-out mode you will
not be able to use the Delay Start function.
ge.com
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until
the display shows
SF.
Touch the
BROIL HI/LO
and
COOKING
TIME
pads at the same time for 2
seconds. The display will show
F
(Fahrenheit).
Touch the
BROIL HI/LO
and
COOKING
TIME
pads again at the same time for
2 seconds. The display will show
C
(Centigrade).
Touch the
START
pad.
Changing the Speed of the +/– Pads
As you use the +/– pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change
the speed.
To set the speed you prefer, follow the
steps below:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until
the display shows
SF.
Touch the
+
pad. The display will
show you a set speed between 1 and 5.
Touch the
+
pad to increase the speed
up to the number 5.
Touch the
pad to decrease the
speed down to the number 1.
Touch the
START
pad to activate the
setting and leave the control set in this
special features mode.