GE JKS06BFBB User Manual - Page 7
Safety Instructions, Care and Cleaning, Troubleshooting Tips, Consumer Support, Operating Instructions
View all GE JKS06BFBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support Tones at the End of a Timed Cycle At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6 second beep may be canceled. To cancel the 6 second beep: Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. ge.com Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.) Press the START pad. 12 Hour, 24 Hour or Clock Black-Out Your control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below. Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Press the CLOCK pad once. The display will show 12 hr. If this is the choice you want press the START pad. Press the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want press the START pad. Press the CLOCK pad again to blackout the clock display. The display will show OFF. If this is the choice you want press the START pad. NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function. Changing the Speed of the + or - Pads As you use the + or - pads when setting a time Press any + pad to increase the or temperature, you may notice the display changes slowly. This special feature allows you to speed up to the number 5. change the speed. To set the speed you prefer, Press any - pad to decrease the or follow the steps below. speed down to the number 1. Press the BAKE and BROIL HI/LO Press START to activate the setting pads at the same time for 3 seconds until the display shows SF. and leave the control set in this special features mode. Press any + pad. The display will show you a set speed between 1 and 5. 7