GE JM250DFCC Installation Instructions - Page 18

Using the self-cleaning oven. The oven door must be closed and all controls must be set correctly for the cycle to work properly. How to Delay the Start of Cleaning Make sure the clock shows the correct time of day. Press the SELF CLEAN pad. Using the INCREASE or DECREASE pads, enter the desired clean time. Press the DELAY START pad. The earliest start time you can set will appear in the display. Using the INCREASE or DECREASE pads, enter the time of day you want the clean cycle to start. The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. The oven shuts off automatically when the clean cycle is complete. When the LOCKED DOOR light is off, open the door. Press the START pad. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. „ You cannot set the oven for cooking until the oven is cool enough for the door to unlock. „ While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the COOKING TIME pad. „ If the racks become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven racks with the paper towel. 18