GE JVM6172SKSS Installation Instructions - Page 21

Check Blower Motor, Orientation, Adapting Microwave Blower, For Recirculation

Get GE JVM6172SKSS PDF manuals and user guides View all GE JVM6172SKSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installation Instructions C3. CHECK BLOWER MOTOR ORIENTATION 1 The blower fan blade opening should be facing the front of the microwave. If the fan opening is already facing the front of the microwave, skip to Step C5. Otherwise, continue to Step C4 to adjust the blower orientation. C4. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION 1 Remove and save screws that holds blower motor to microwave oven. Blower Motor Retaining Screws Back of Microwave Oven 2 Open the blower door by lifting it up at the back of the microwave oven. 4 Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave. BEFORE: Fan Blade Openings Facing Up Roll AFTER: Fan Blade Openings Facing Forward 3 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. NOTE: Make sure wires remain routed in the grooves of the motor frame. 5 Place the blower unit back into the opening. CAUTION Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
AFTER: Fan Blade
Openings Facing
Forward
4
21
Roll the blower unit 90° so that fan blade openings
are facing toward the front of the microwave.
Roll
NOTE:
Make sure wires remain routed in the grooves of
the motor frame.
Installation Instructions
BEFORE: Fan Blade
Openings Facing Up
CHECK BLOWER MOTOR
ORIENTATION
ADAPTING MICROWAVE BLOWER
FOR RECIRCULATION
C3
.
C4
.
1
1
The blower fan blade opening should be facing
the front of the microwave. If the fan opening is
already facing the front of the microwave, skip to
Step C5. Otherwise, continue to Step C4 to adjust
the blower orientation.
Remove and save screw
s
that holds blower motor
to microwave oven.
2
Open the blower door by lifting it up at the back of
the microwave oven.
3
Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust the
blower unit.
Back of
Microwave
Oven
Blower Motor
Retaining
Screws
5
Place the blower unit back into the opening.
CAUTION
Do not pull or stretch the blower
unit wiring. Make sure the wires are not pinched.