GE NX-148E User Manual - Page 13
BYPASS, GROUP BYPASS, UNBYPASSING, EMERGENCY ACTIVATION KEYS, NOTE: You must press and hold these - manual
UPC - 782136404340
View all GE NX-148E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Procedure #2 If you do not know the number of the zone you wish to bypass, use the following steps: Step 1 Step 2 Step 3 Step 4 Press r • The description for zone 1 will be displayed. Use the • - scroll keys to browse through the custom descriptions for the zones in this system. To bypass or unbypass a specific zone, press the [BYPASS] key while that zone is displayed. When finished, press the # key to return to the code entry screen. GROUP BYPASS By pressing the [BYPASS] key, followed by the 0 key, then the [BYPASS] key again, all zones that are designated as group bypass zones will be bypassed. Press the [BYPASS] key again to exit group bypassing. UNBYPASSING To manually unbypass zones, perform the bypassing procedure on a zone that is already bypassed. NOTE: All zones will automatically be unbypassed each time the system is disarmed. EMERGENCY ACTIVATION KEYS NOTE: You must press and hold these keys for 2 seconds to activate these functions. Your system may not be programmed for these activations. Fire Key - If programmed, you can activate the Fire alarm by pressing the Emergency Activation [Fire] key for two seconds. If your system is connected to a monitoring center, an emergency report could be sent to that center. This key should only be pressed in an emergency situation requiring response by fire department personnel. NX148E-CF 11