GE NX-148E User Manual - Page 9

KEYPAD FUNCTIONS ARMING YOUR SYSTEM IN THE "AWAY" MODE AWAY is utilized when the user is going away from the premise and wants the interior protected. Listed below are the steps to arm in the AWAY Mode: Step 1 Close all protected doors and windows. Ready light will be on or flashing when all protected zones and sensors are secure. NOTE: If any zones System Ready Type Code to Arm are bypassed, a sensor in that zone can be violated without affecting the ready light. The security system will not arm if the ready light is off. Refer to "Making Your System Ready to Arm". System Not Ready For help, press º If the power light is off, you have no AC power. Restore power if possible. If not, contact the installing company. Step 2 Enter your 4 or 6 digit user code to arm the system. The armed and exit lights will illuminate. You may now leave the building. System Armed All Zones Secure IMPORTANT! The exit light will flash rapidly for the last 10 seconds of the exit delay as a warning to the user that the exit time is about to expire. The user may wish to disarm and rearm the system if more time is needed. MAKING YOUR SYSTEM READY TO ARM If the ready light is not on or if it is flashing, a zone is not secure. To identify this zone, use the scroll keys • - to the right of the display to browse through the zones that are not normal. If you wish to bypass or unbypass one of these zones, press the [BYPASS] key while that zone is being displayed. When finished viewing the zones, press the # key to return to the code entry screen. NX148E-CF 7