GE PB950SFSS Use and Care Manual - Page 33

Oven Heating Elements Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated. GEAppliances.com To clean the oven floor, gently lift the bake element. On some models, the bake element is not exposed and is under the oven floor. Clean with warm, soapy water. Wipe up heavy soil on the oven bottom. Oven Vent on Radiant Glass Cooktops All models have an oven vent located behind the right rear surface unit. On double ovens, there is an additional oven vent for the upper oven behind the left rear surface unit. This area could become hot during oven use. It is normal for steam to come out of the vent, and moisture may collect underneath it when the oven is in use. The vent is important for proper air circulation. Never block this vent. Rail Stop guide Storage Drawer Removal (on some models) To remove the drawer: To replace the drawer: Pull the drawer out until it stops. Place the drawer rails on the guides. Lift the front of the drawer until the stops clear the guides. Remove the drawer. Push the drawer back until it stops. Lift the front of the drawer and push back until the stops clear the guides. Lower the front of the drawer and push back until it closes. Removable Warming Drawer Pan (on some models) NOTE: For models with an electric warming drawer before performing any adjustments, cleaning or service, disconnect the range electrical power supply at the household distribution panel by removing the fuse or switching off the circuit breaker. Make sure the drawer heating element is cool. „ Never place, use or self-clean the drawer pan in the upper oven. „ Warming drawer has a removable pan for easy cleaning. Clean with hot, soapy water and a sponge or dish towel. Dry with a clean cloth. Replace the pan in the warming drawer. NOTE: Allow warming drawer to cool before removing pan. NOTE: Wipe spills promptly after each use. 33