GE PB970 Owners Manual - Page 28

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Special features of your oven control. Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them. The special feature modes can only be activated while the display is showing the time of day. They remain in the control's memory until the steps are repeated. To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads at the same time. The lower oven BROIL HI/LO and BAKE pads will not activate special features. When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset. Help Function Touch this pad to get additional information on the keypad of your choice. Touch the HELP pad and the display will show "Press keypad for help on that feature or 1 for options." The options on pages 28 and 29 can be adjusted using the method described here or through HELP. 12-Hour Shutdown + With this feature, should you forget and leave the Touch the DELAY START pad until oven on, the control will automatically turn off the no shdn (no shut-off) appears in the oven after 12 hours during baking functions or display. after 3 hours during a broil function. Touch the START pad to activate the If you wish to turn OFF this feature, follow no shut-off and leave the control the steps below. set in this special features mode. Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows SF. Fahrenheit or Celsius Temperature Selection + Your oven control is set to use the Fahrenheit Touch the COOK TIME and BROIL temperature selections, but you may change this HI/LO pads at the same time. The + to use the Celsius selections. display will show F (Fahrenheit). Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows SF. Touch the COOK TIME and BROIL HI/LO pads again at the same time. The display will show C (Celsius). Touch the START pad. Tones at the End of a Timed Cycle + At the end of a timed cycle, 3 short beeps will Touch the BROIL pad. The display sound followed by one beep every 6 seconds shows CONTI BEEP (continuous until the CLEAR/OFF pad is touched. This beep). Touch the BROIL pad again. continual 6-second beep may be canceled. The display shows SINGLE BEEP. To cancel the 6-second beep: (This cancels the one beep every 6 seconds.) Touch the upper oven BROIL HI/LO and BAKE pads at the same time Touch the START pad. until the display shows SF. 28