GE PGCS1RKZSS Use and Care Manual - Page 17

Trim kits and decorator panels. 3/4 ″ (19 mm) or Raised Panel A raised panel design screwed or glued to a 1/4″ (6 mm) thick backing, or a 3/4″ (19 mm) routed board can be used. The raised portion of the panel must be fabricated to permit clearances of at least 2″ (5.1 cm) from the handle side for fingertip clearance. Panels thicker than 1/4″ (6 mm), up to 3/4″ (19 mm) max., will require that the outer 5/16″ (8 mm) of panel perimeter be no thicker than 1/4″ (6 mm). Weight limitations for custom panels: Fresh Food 10 lbs. (4.5 kg) max. for each door Freezer Door 18 lbs. (8 kg) max. Panels thicker than 1/4″ (6 mm) 1/4″ (6 mm) Thick Backing 5/16″ (8 mm) 1/4″ (6 mm) max 3/4″ (19 mm) 2″ (5.1 cm) Clearance Handle Side Appearance Panel Dimensions for Custom Wood Panels 1/8″ (3 mm) Left Fresh Food Door 1/4″ (6 mm) 5/16″ (8 mm) minimum at 1/4″ (6 mm) thickness Top, left and bottom Raised portion of panel 2″ (51 mm) minimum at 1/4″ (6 mm) thickness Handle side 38 15/16″ (98.9 cm) 3/4″ (19 mm) Refrigerator Door Right Fresh Food Door 1/8″ (3 mm) 2″ (51 mm) minimum at 1/4″ (6 mm) thickness Handle side Raised portion of panel 5/16″ (8 mm) minimum at 1/4″ (6 mm) thickness Top, right and bottom 1/4″ (6 mm) 38 15/16″ (98.9 cm) 1/8″ (3 mm) 1/4″ (6 mm) 17 16 29/32″ (42.9 cm) 16 29/32″ (42.9 cm) 2″ (51 mm) minimum at 1/4″ (6 mm) thickness Handle side 5/16″ (8 mm) minimum at 1/4″ (6 mm) thickness Left, right and bottom sides Raised portion of panel 1/8″ (3 mm) Freezer Door 35 29/32″ (91.2 cm) 26 3/32″ (66.3 cm) 1/8″ (3 mm) 1/4″ (6 mm) 1/4″ (6 mm) 1/8″ (3 mm) 1/4″ (6 mm)