GE PNM1871SMSS Installation Instructions - Page 22

Installing the Charcoal Filter, On 1400 and 1600 Series models, On 1800 Series models - charcoal filter replacement

Get GE PNM1871SMSS PDF manuals and user guides
UPC - 084691164265
View all GE PNM1871SMSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Installation Instructions C5. MOUNT THE MICROWAVE OVEN (cont.) 5 Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw. 6 Tighten center screw completely. 7 Tighten the outer two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.) 8 Install grease filter. See the Owner's Manual packed with the microwave. C6. INSTALLING THE CHARCOAL FILTER 1 On 1400 and 1600 Series models, remove screws on front of grille using a #1 Phillips screwdriver. On 1800 Series models, remove screws on top front of grille using a #2 Phillips screwdriver. 2 Open the door. 3 Remove the grille. On 1400 and 1600 Series models, pull the grille straight off. On 1800 Series models, slide the grille to the left and pull it straight off. Charcoal Filter 4 Install the charcoal filter. When properly installed, the wire mesh of the filter should be visible from the front. 5 Replace the grille and the screws. 6 Close the door. Insert mesh-side up 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
5
6
3
4
2
1
INSTALLING THE
CHARCOAL FILTER
C6.
MOUNT THE MICROWAVE
OVEN (cont.)
C5.
Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
Replace the grille and the screws.
Close the door.
22
Charcoal
Filter
Insert mesh-side up
On 1400 and 1600 Series models,
remove screws
on front of grille using a #1 Phillips screwdriver.
On 1800 Series models,
remove screws on top
front of grille using a #2 Phillips screwdriver.
Open the door.
Remove the grille.
On 1400 and 1600 Series models,
pull the grille
straight off.
On 1800 Series models,
slide the grille to the left
and pull it straight off.
Installation Instructions
8
7
6
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
Tighten center
screw completely.
Install grease filter. See the Owner’s Manual
packed with the microwave.
5