GE PVM9005EJES Installation Instructions - Page 17
Attach The Mounting Plate, To The Wall, Installation Overview
View all GE PVM9005EJES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Instructions B OUTSIDE TOP EXHAUST 9HUWLFDO'XFW INSTALLATION OVERVIEW B1. Attach Mounting Plate to Wall B2. Prepare Top Cabinet B3. Adjust Blower Motor B4. Install Exhaust Adaptor B5. Mount Microwave Oven B6. Connect Ductwork B1 ATTACH THE MOUNTING PLATE TO THE WALL A B 7RXVHWRJJOHEROWV: Mounting Plate Spacing for Toggles More Than Wall Thickness Toggle Wings Toggle Bolt C D Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. Recommended locations on the mounting plate are indicated by A, B, C and D. 1 Remove the toggle wings from the bolts. 2 Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the toggle wings to 3ø4s onto each bolt. Wall Mounting Plate Bolt End 3 Insert the toggle wings into the holes in the wall and place the mounting plate against the wall. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet when pushed flush against the wall and that the plate is properly centered under the cabinet. CAUTION: %HFDUHIXOWRDYRLGSLQFKLQJ ILQJHUVEHWZHHQWKHEDFNRIWKHPRXQWLQJSODWHDQG the wall. 4 Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. 17