Gigabyte GA-5YASV-RH Manual - Page 47

USB Controller, Legacy USB Support, Route Port 80h cycles

Get Gigabyte GA-5YASV-RH PDF manuals and user guides View all Gigabyte GA-5YASV-RH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Mode This option allows user to set Parallel Port transfer mode. BIOS Setup Bi-directional Use this setting to support bi-directional transfers on the parallel port. (Default setting) EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. Base I/O Address 378 Set IO address to 378. (Default setting) 278 Set IO address to 278. Iterrupt IRQ5 IRQ7 Set Interrupt as IRQ5. Set Interrupt as IRQ7. (Default setting) USB Controller This item allows users to enable or disable the USB device by setting item to the desired value. Enabled Enable USB controller. (Default setting) Disabled Disbale this function. Legacy USB Support This option allows user to function support for legacy USB. Enabled Enables support for legacy USB (Default setting) Disabled Disables support for legacy USB. Route Port 80h cycles to Set route port 80h cycles to either PCI or LPC bus. PCI Set Route Port 80h I/O cycles to the PCI bus. (Default setting) LPC Set Route Port 80h I/O cycles to the LPC bus. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
47
BIOS Setup
²
Mode
This option allows user to set Parallel Port transfer mode.
±
Bi-directional
Use this setting to support bi-directional transfers on the parallel
port. (Default setting)
±
EPP
Using Parallel port as Enhanced Parallel Port.
±
ECP
Using Parallel port as Extended Capabilities Port.
²
Base I/O Address
±
378
Set IO address to 378. (Default setting)
±
278
Set IO address to 278.
²
Iterrupt
±
IRQ5
Set Interrupt as IRQ5.
±
IRQ7
Set Interrupt as IRQ7. (Default setting)
&
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
±
Enabled
Enable USB controller. (Default setting)
±
Disabled
Disbale this function.
&
Legacy USB Support
This option allows user to function support for legacy USB.
±
Enabled
Enables support for legacy USB (Default setting)
±
Disabled
Disables support for legacy USB.
&
Route Port 80h cycles to
Set
route port 80h cycles to either PCI or LPC bus.
±
PCI
Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
±
LPC
Set Route Port 80h I/O cycles to the LPC bus.