Gigabyte GA-7N400 User Manual - Page 32
IDE3 / IDE4 RAID/ATA133, Green Connector, SATA0 / SATA1 Serial ATA Connector
View all Gigabyte GA-7N400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English 9) IDE3 / IDE4 (RAID/ATA133, Green Connector)(j) Important Notice: The red stripe of the ribbon cable must be the same side with the Pin1. If you wish to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133). Then, install the correct driver to have proper operation. For details, please refer to the GigaRAID manual. 39 1 IDE4 IDE3 40 2 10) SATA0 / SATA1 (Serial ATA Connector)(j) You can connect the Serial ATA device to this connector, it provides you high speed transfer rates (150MB/sec). If you wish to use RAID function, please use it in unity with BIOS and install the correct driver to have proper operation. For details, please refer to the SATA RAID manual. 1 1 7 7 SATA0 SATA1 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND Silicon Image Sil3112 chip supports Serial ATA connectors hot plug function. j For GA-7N400 Pro2 only. k For GA-7N400 only. l For GA-7N400-L only. N400 Pro2 / N400 Series Motherboard - 28 - 7n400pro2_1002_q.p65 28 2003/7/4, ¤U¤È 03:27