Gigabyte GA-7N400 User Manual - Page 56
Onboard Serial Port 2, UART Mode Select, UR2 Duplex Mode, Onboard Parallel port
View all Gigabyte GA-7N400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
English Onboard Serial Port 2 Disabled Disable onboard Serial port 2. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8, using IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8, using IRQ4. 2E8/IRQ3 Auto Enable onboard Serial port 2 and address is 2E8, using IRQ3. BIOS will automatically setup the port 2 address. UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. Normal Set onboard I/O chip UART to Normal Mode. (Default Value) IrDA Set onboard I/O chip UART to IrDA Mode. ASKIR Set onboard I/O chip UART to ASKIR Mode. UR2Duplex Mode This feature allows you to seclect IR mode. This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR". Half IR Function Duplex Half. (Default Value) Full IR Function Duplex Full. Onboard Parallel port This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller. Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378, using IRQ7. (Default Value) 278/IRQ5 Enable onboard LPT port and address is 278, using IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC, using IRQ7. N400 Pro2 / N400 Series Motherboard - 52 - 7n400pro2_1001_b.p65 52 2003/7/4, ¤U¤È 03:29