Gigabyte GA-880GMA-USB3 Manual - Page 38

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software DRAM Configuration Data Drive Strength MEMCLK Drive Strength Addr/Cmd Drive Strength CS/ODT Drive Strength CKE Drive Strength **DCTs Addr/Cmd Timing** Addr/Cmd setup time Addr/Cmd fine delay CS/0DT setup time CS/0DT fine delay CKE setup time CKE fine delay [Auto] 1.0x [Auto] 1.5x [Auto] 1.5x [Auto] 1.5x [Auto] 1.5x DCT0 [Auto] 1/2T [Auto] 0/64 [Auto] 1/2T [Auto] 0/64 [Auto] 1/2T [Auto] 0/64 [Auto] 1.5x [Auto] 1.5x [Auto] 2.0x [Auto] 2.0x [Auto] 2.0x DCT1 [Auto] 1/2T [Auto] 0/64 [Auto] 1/2T [Auto] 0/64 [Auto] 1/2T [Auto] 0/64 Item Help Menu Level  Bank Interleaving Channel Interleave [Enabled] [Enabled] Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults DCTs Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. CAS# latency Options are: Auto (default), 4T~12T. RAS to CAS R/W Delay Options are: Auto (default), 5T~12T. Row Precharge Time Options are: Auto (default), 5T~12T. Minimum RAS Active Time Options are: Auto (default), 15T~30T. 1T/2T Command Timing Options are: Auto (default), 1T, 2T. TwTr Command Delay Options are: Auto (default), 4T~7T. Trfc0 for DIMM1 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. Trfc2 for DIMM2 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. Trfc1 for DIMM3 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. BIOS Setup - 38 -