Gigabyte GA-8I925XC-G Manual - Page 35
CPU Enhanced Halt C1E
View all Gigabyte GA-8I925XC-G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English Password Check Setup System The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. CPU Hyper-Threading Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working Disabled for operating system with multi processors mode supported. (Default value) Disables CPU Hyper Threading. Limit CPUID Max. to 3 Enabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled Disable CPUID Limit for windows XP. (Default value) No-Execute Memory Protect (Note 1) Enabled Enable No-Execute Memory Protect function. Disabled Disable No-Execute Memory Protect function. (Default value) CPU Enhanced Halt (C1E) (Note 1) Enabled Enable CPU Enhanced Halt (C1E) function. Disabled Disable CPU Enhanced Halt (C1E) function. (Default value) CPU Thermal Monitor 2 (TM2) (Note 1) Enabled Enable CPU Thermal Monitor 2 (TM2) function. Disabled Disable CPU Thermal Monitor 2 (TM2) function. (Default value) DRAM Data Intergity Mode (Note 2) If you are using the Non-ECC DRAM, the mode will show "Non-ECC" and this function is disabled. ECC Set memory mode to ECC. Non-ECC Set memory mode to Non-ECC. (Note 1) This item will show up when you install a processor which supports this function. (Note 2) This item only for GA-8I925XC-G. - 35 - BIOS Setup