Gigabyte GA-8I925XC-G Manual - Page 38
Onboard H/W LAN
View all Gigabyte GA-8I925XC-G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
English Onboard H/W LAN Enabled Enable onboard H/W LAN function. (Default value) Disabled Disable this function. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Disabled Enable this function. Disable this function. (Default value) Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8. 3E8/IRQ4 2E8/IRQ3 Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. Onboard IrDA Port Auto BIOS will automatically setup the IrDA port address. 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 Enable onboard IrDA port and address is 3F8/IRQ4. Enable onboard IrDA port and address is 2F8/IRQ3. (Default value) Enable onboard IrDA port and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard IrDA port and address is 2E8/IRQ3. Disabled Disable onboard IrDA port . UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. ASKIR Set onboard I/O chip UART to ASKIR Mode. IrDA Set onboard I/O chip UART to IrDA Mode. (Default value) UR2 Duplex Mode This feature allows you to select IR mode. Half IR Function Duplex Half. (Default value) Full IR Function Duplex Full. Onboard Parallel port Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Using Parallel port as Standard Parallel Port. (Default value) EPP Using Parallel port as Enhanced Parallel Port. ECP ECP+EPP Using Parallel port as Extended Capabilities Port. Using Parallel port as ECP & EPP mode. ECP Mode Use DMA 3 Set ECP Mode Use DMA to 3. (Default value) 1 Set ECP Mode Use DMA to 1. GA-8I925XE-G / GA-8I925XC-G Motherboard - 38 -