Gigabyte GA-970A-UD3 Manual - Page 39
Addr/Cmd Fine Delay
View all Gigabyte GA-970A-UD3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
**DCTs Addr/Cmd Timing** Addr/Cmd Setup Time Options are: Auto (default), 1/2T, 2T. Addr/Cmd Fine Delay Options are: Auto (default), 0/64~31/64. CS/ODT Setup Time Options are: Auto (default), 1/2T, 2T. CS/ODT Fine Delay Options are: Auto (default), 0/64~31/64. CKE Setup Time Options are: Auto (default), 1/2T, 2T. CKE Fine Delay Options are: Auto (default), 0/64~31/64. Channel interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. (Default: Enabled) Bank Interleaving Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access different banks of the memory to increase memory performance and stability. (Default: Enabled) DQS Training Control Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS) CKE Power Down Mode Determines whether to set the memory to power down mode when the CKE pin is closed. (Default: Disabled) Memclock tri-stating Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled) ******** System Voltage Optimized ******** System Voltage Control Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto) CPU PLL Voltage Control Allows you to set the CPU PLL voltage. Normal Supplies the CPU PLL voltage as required. (Default) 2.060V ~ 3.170V The adjustable range is from 2.060V to 3.170V. Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. - 39 - BIOS Setup