Gigabyte GA-EP45-DS3R Manual - Page 17

Step 3: Enter the User Password created in "Easy Mode" or "Advanced Mode." Click OK to continue. If you incorrectly enter the password three times, Ultra TPM will be locked. To be able to enter the password again, go to the "Security Chip Configuration" menu in BIOS Setup and then set "Security Chip" to "Enabled/Activate." DO NOT turn off or restart the computer when a user key is being generated. Step 4: Click OK to exit and complete the creation of the Portable User Key. You are able to load or unload your PSD by simply plugging or unplugging the USB flash drive. After completing the settings and when removing the USB flash drive(s), the Infineon Security Platform Settings Tool will give the following warning message, which is normal. B. Duplicate... Step 1: To duplicate the key to another USB flash drive, right-click on the Ultra TPM icon and select Duplicate. Step 2: When the Duplicate USB Key dialog box appears, select the drive letter of the source USB flash drive and then select the drive letter of the destination USB flash drive. Click OK to continue. Step 3: Click OK to complete the duplication of the key. If you want to uninstall the Ultra TPM software, be sure to insert the USB flash drive containing the Portable User Key into your computer before the uninstallation. - 17 -