Gigabyte GA-EP45-UD3P Manual - Page 26
IDE IDE Connector, SATA2_0/1/2/3/4/5 SATA 3Gb/s Connectors, Controlled by ICH10, Orange
UPC - 818313006530
View all Gigabyte GA-EP45-UD3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember to set the jumpers and the cabling according to the role of the IDE devices (for example, master or slave). (For information about configuring master/slave settings for the IDE devices, read the instructions from the device manufacturers.) 40 39 2 1 8) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by ICH10, Orange) l The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. SATA2_4 7 7 SATA2_5 SATA2_2 SATA2_3 Pin No. Definition SATA2_0 1 GND 1 2 TXP 3 TXN 1 4 GND SATA2_1 5 RXN 6 RXP 7 GND l Only for GA-EP45-UD3. Hardware Installation - 26 - Please connect the L-shaped end of the SATA 3Gb/s cable to your SATA hard drive.